3604672RX CAT 3204 Cummins Starter Motor Wholesale

3604672RX Starter Motor Fleet Replacement Supply for Caterpillar 3204 and specified Cummins engine

3604672RX supports Caterpillar 3204 and specified Cummins engine sourcing where buyers need a defined electrical and drive-end match. Its 12V, 4.5kW, 10T CW specification must remain linked to the long 60 mm drive position for CAT 3204 and specified Cummins applications; a visually related unit may belong on a different RFQ line.

Before comparing 3604672RX prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

3604672RX Starter Motor Technical Data for Fleet Parts Buyers

3604672RX Caterpillar 3204 Cummins 12V 4.5kW 10T starter dimensions.

The 3604672RX dimensional review starts at the mounting face: verify 3 × Ø16 mounting holes, Ø146 mounting-hole circle and Ø92 locating diameter. Then compare the 60 mm distance to drive gear. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For 3604672RX, electrical and mechanical identity must agree: 12V, 4.5kW, 10T, module 3.175 and CW. Check the terminals and solenoid position before installation. If the old unit differs at one of these points, keep it outside the defined stock line.

3604672RX Starter Motor Cross-Reference Review for Fleet Buyers

The 3604672RX cross-reference group includes 3604672RX, 1688615C91, 2508912C91, 10461069, 10461108, 1990312, 1993761. These numbers improve search coverage across fleets and supplier systems, but they do not replace a check of 12V, 4.5kW, 10T, CW, mounting geometry and terminals.

If a mixed 3604672RX enquiry contains different pinions, drive positions or connector layouts, list each complete reference and photograph separately. Elecdura can then return distinct offers instead of placing unlike starters under one broad reference family.

3604672RX Starter Motor Fleet Supply and Replenishment Support

Wholesale planning for 3604672RX can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Stock planning should reflect the supported Caterpillar 3204 and specified Cummins engine population, recent consumption and transfer time between service locations. Keeping 3604672RX, the 10T drive and the approved mounting interface visible in the inventory record reduces emergency substitution and improves later reorder accuracy.

The production video gives importers and fleet buyers a view of Elecdura starter assembly and electrical checks. For 3604672RX, use it alongside the product-specific reference, application and physical controls on this page, rather than treating a general factory presentation as evidence of fitment.

3604672RX Starter Motor Questions from Commercial Buyers

How can branches reduce emergency transfers of 3604672RX stock in a CAT 3204 Cummins workshop program?

Quote by machine or engine serial and retain the measured drive-end image for later mixed-brand reorders. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What pre-installation circuit review supports replacement with 3604672RX in a CAT 3204 Cummins workshop workshop?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for 3604672RX helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

Can 3604672RX be selected from the application name alone during workshop sourcing?

Confirm 3604672RX against the complete OE number, the stated Caterpillar 3204 and specified Cummins engine use and clear front, side and terminal photographs. The decisive points are 10T, 3 × Ø16 mounting holes and 60 mm distance to drive gear. Those controls keep visually related starters from being combined in one order.

Which checks should follow an OE-number match for 3604672RX in a CAT 3204 Cummins workshop sourcing program?

A number match narrows the search but does not finish it. For 3604672RX, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which dimensions in the 3604672RX drawing should receiving teams sample during a CAT 3204 Cummins workshop inspection?

For 3604672RX, sample the 3 × Ø16 mounting holes, Ø92 locating diameter, Ø146 mounting-hole circle and 60 mm distance to drive gear. Count the 10T pinion and photograph the terminal side in the same inspection. These points can be checked without dismantling the unit and give receiving teams a practical comparison with the approved sample.

What receiving records are useful for a shipment of 3604672RX during a CAT 3204 Cummins workshop receiving check?

Receiving should verify the 3604672RX label, quantity and packaging before opening sampled cartons. Compare the 10T drive, Ø92 locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How should a buyer request samples and bulk pricing for 3604672RX in a CAT 3204 Cummins workshop sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For 3604672RX, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

How should a workshop document a service issue involving 3604672RX in a CAT 3204 Cummins workshop review?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate 3604672RX without assuming that every no-crank complaint originates inside the starter.

3604672RX Ask for Starter Motor Export Pricing

Prepare the 3604672RX enquiry with the exact application, full removed-unit reference, front and terminal-side photos, quantity, destination and target date. Send it to info@elecdurauto.com so Elecdura can return a technically defined offer covering samples or bulk supply, export packing, warranty and delivery options.