S0752S Case 380B MF50 Starter Motor Wholesale

S0752S Starter Motor Wholesale Fitment for Case 380B and Massey Ferguson 50 equipment

Backhoe and tractor parts distributors, rental fleets and heavy-duty starter suppliers use S0752S to keep Case 380B and Massey Ferguson 50 equipment demand tied to one 12V, 2.8kW, 10T CW configuration. The practical distinction is the 12V 2.8kW 10T catalog configuration for Case and Massey equipment, which should be checked before a similar heavy-duty housing is accepted.

For the first S0752S order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.

S0752S Starter Motor Specification Table for B2B Sourcing

S0752S Case 380B and Massey Ferguson 50 equipment 12V 2.8kW 10T starter mounting dimensions.

A warehouse can confirm the S0752S interface without dismantling the unit. Measure Ø89 mm locating diameter and Ø127 mm mounting-hole circle, inspect 3 mounting holes shown as 11, 11, 11 mm, then verify the 48.5 mm drive-end distance. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.

For S0752S, record 10T, CW, 12V and 2.8kW, including module 3.175. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.

S0752S Starter Motor Reference Matching for B2B Quotations

1. Search group: S0752S, 112660, 0001354107, 0001359035, 0001359045, 0001359059, 0001359069 can help distributor teams locate the relevant starter family.

2. Order boundary: Confirm the complete reference with 12V, 2.8kW, 10T, CW, the drawing and terminal photographs before accepting one physical unit.

S0752S Starter Motor Aftermarket Supply for Regional Distributors

Distributors can combine an initial S0752S sample plan with a later replenishment forecast. MOQ is 20 pieces, normal lead time is 7–15 days after confirmation and warranty is 18 months under agreed terms; packing and shipping are quoted for the actual route and arrival requirement.

Separate loader and tractor service stock by approved physical unit. Buyers should also state whether the order supports a single workshop, several branches or a fleet contract, allowing samples, safety stock, carton labels and staged dispatch to be planned around the actual service requirement.

The production video gives importers and fleet buyers a view of Elecdura starter assembly and electrical checks. For S0752S, use it alongside the product-specific reference, application and physical controls on this page, rather than treating a general factory presentation as evidence of fitment.

S0752S Starter Motor Questions from Commercial Buyers

What should a distributor match before ordering S0752S for Case 380B and Massey Ferguson 50 equipment during fleet sourcing?

Use the full old-unit number and Case 380B and Massey Ferguson 50 equipment record. Compare the 10T pinion, 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

Which operating factors should guide a fleet's S0752S reserve quantity in a Case 380B MF50 fleet program?

Review workshop consumption by the stated Case 380B and Massey Ferguson 50 equipment population instead of pooling every visually similar starter. Record monthly issues, lead-time exposure and the reserve required at each branch. That information supports a practical S0752S reorder point and avoids holding the wrong drive-end version as emergency stock.

Why is the S0752S reference match only the start of product selection in a Case 380B MF50 fleet sourcing program?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S0752S group is acceptable only when 12V, 2.8kW, 10T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

What electrical checks help confirm that S0752S is actually required during a Case 380B MF50 fleet electrical check?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for S0752S installation and for any later service discussion with the supplier.

How should a buyer compare the old unit with the S0752S technical image during a Case 380B MF50 fleet inspection?

For S0752S, check 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 48.5 mm drive-end distance. Count the 10T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.

Which arrival photographs help trace a shipment of S0752S during a Case 380B MF50 fleet receiving check?

Receiving should verify the S0752S label, quantity and packaging before opening sampled cartons. Compare the 10T drive, Ø89 mm locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How can an importer obtain an accurate delivered price for S0752S in a Case 380B MF50 fleet sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S0752S, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

Which installation facts help review unusual performance from S0752S in a Case 380B MF50 fleet review?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate S0752S without assuming that every no-crank complaint originates inside the starter.

S0752S Ask for Starter Motor Export Pricing

Send the complete S0752S reference, Case 380B and Massey Ferguson 50 equipment details, removed-unit label and photographs, quantity, destination and required arrival date. Email info@elecdurauto.com to discuss the specified 12V, 2.8kW, 10T CW starter, MOQ, packing, lead time, warranty and freight.