S0754S Lamborghini SAME Starter Motor Wholesale

S0754S Starter Motor Distributor Application Guide for Lamborghini 983L and SAME Centauro 70 tractor

For a fleet parts team, S0754S identifies one Lamborghini 983L and SAME Centauro 70 tractor requirement. The 12V 3.0kW 11T catalog configuration for Lamborghini and SAME tractors provides a clear fitment boundary for sample, stock and replacement reviews.

For the first S0754S order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.

S0754S Starter Motor Specification Table for B2B Sourcing

S0754S Lamborghini 983L and SAME Centauro 70 tractor 12V 3.0kW 11T starter mounting dimensions.

Check the S0754S drawing against the removed starter at the mounting face and drive end. The critical references are 2 mounting holes shown as 12.5, 12.5 mm, Ø82.5 mm locating diameter, Ø105 mm mounting-hole circle and 22 mm drive-end distance. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

After the S0754S mounting check, verify 12V, 3.0kW, 11T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

S0754S Starter Motor OE Cross-References for Distributor Enquiries

• Use the full number: Start with S0754S, 110530, 0001354014, 0001354090, 0001358003, 0001358006, retaining prefixes, suffixes and separators in the RFQ.

• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

S0754S Starter Motor Aftermarket Supply for Regional Distributors

Wholesale planning for S0754S can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified S0754S drive end and electrical rating throughout the order.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved S0754S configuration remains defined by 12V, 3.0kW, 11T, CW, mounting geometry and terminals, which should be retained in the purchase record.

S0754S Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for S0754S in a Lamborghini SAME branch sourcing program?

A number match narrows the search but does not finish it. For S0754S, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

How should Lamborghini distributors plan stock for S0754S in a Lamborghini SAME branch program?

Keep the approved product view with seasonal agricultural inventory. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

How should a fleet workshop verify S0754S against the removed starter during branch sourcing?

For S0754S in Lamborghini 983L and SAME Centauro 70 tractor, confirm the machine or engine identity and read the full old-unit label. Check 11T, Ø105 mm mounting-hole circle, Ø82.5 mm locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item when the stated application overlaps.

Which electrical conditions can imitate a failed S0754S starter motor during a Lamborghini SAME branch electrical check?

Before fitting S0754S, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

How does the S0754S mounting drawing support product approval during a Lamborghini SAME branch inspection?

For S0754S, compare 2 mounting holes shown as 12.5, 12.5 mm and Ø105 mm mounting-hole circle in a straight front view, then Ø82.5 mm locating diameter and 22 mm drive-end distance in the side view. Add 11T, CW and terminal orientation; this is more reliable than an angled overall photograph.

Which physical points should be checked before S0754S enters branch stock during a Lamborghini SAME branch receiving check?

For S0754S, match carton and product labels to the purchase order, then sample 12V, 11T, 2 mounting holes shown as 12.5, 12.5 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about S0754S in a Lamborghini SAME branch sourcing program?

A useful RFQ states S0754S, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned S0754S starter in a Lamborghini SAME branch review?

For a service review of S0754S, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S0754S Request a Starter Motor Fleet Supply Quote

A complete RFQ for S0754S should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 12V 3.0kW 11T CW starter, MOQ, packaging, warranty and shipping choices.