S4005 Massey Ferguson MF285 Starter Motor Wholesale

S4005 Starter Motor Fleet Replacement Supply for Massey Ferguson MF285 tractor

S4005 supports Massey Ferguson MF285 tractor sourcing where buyers need a defined electrical and drive-end match. Its 12V, 2.8kW, 10T CW specification must remain linked to the 12V 2.8kW 10T module-3.175 starter with a 29 mm drive-end distance; a visually related unit may belong on a different RFQ line.

Before comparing S4005 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

S4005 Starter Motor Technical Data for Fleet Parts Buyers

The S4005 dimensional review starts at the mounting face: verify 3 mounting holes shown as 10, 10, 10 mm, Ø127 mm mounting-hole circle and Ø89 mm locating diameter. Then compare the 29 mm drive-end distance. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For S4005, electrical and mechanical identity must agree: 12V, 2.8kW, 10T, module 3.175 and CW. Check the terminals and solenoid position before installation. If the old unit differs at one of these points, keep it outside the defined stock line.

S4005 Starter Motor Cross-Reference Review for Fleet Buyers

The S4005 cross-reference group includes S4005, 111346, 71429500, 71429500R, 71440005, STL0994CL, STL0994ML. Use these numbers to search supplier systems, then confirm 12V, 2.8kW, 10T, CW, mounting geometry and terminals.

For S4005, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S4005 Starter Motor Fleet Supply and Replenishment Support

Wholesale planning for S4005 can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Stock planning should reflect the supported Massey Ferguson MF285 tractor population, recent consumption and transfer time between service locations. Keeping S4005, the 10T drive and the approved mounting interface visible in the inventory record reduces emergency substitution and improves later reorder accuracy.

The production video gives importers and fleet buyers a view of Elecdura starter assembly and electrical checks. For S4005, use it alongside the product-specific reference, application and physical controls on this page, rather than treating a general factory presentation as evidence of fitment.

S4005 Starter Motor Questions from Commercial Buyers

How can branches reduce emergency transfers of S4005 stock in a Massey Ferguson MF285 workshop program?

Record the approved tractor or machine model for accurate dealer and workshop reorders. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What pre-installation circuit review supports replacement with S4005 in a Massey Ferguson MF285 workshop workshop?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for S4005 helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

Can S4005 be selected from the application name alone during workshop sourcing?

Confirm S4005 with the complete OE number, Massey Ferguson MF285 tractor record and clear front, side and terminal photographs. Check 10T, 3 mounting holes shown as 10, 10, 10 mm and 29 mm drive-end distance so visually related starters stay on separate order lines.

Which checks should follow an OE-number match for S4005 in a Massey Ferguson MF285 workshop sourcing program?

A number match narrows the search but does not finish it. For S4005, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which dimensions in the S4005 drawing should receiving teams sample during a Massey Ferguson MF285 workshop inspection?

For S4005, check 3 mounting holes shown as 10, 10, 10 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 29 mm drive-end distance. Count the 10T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.

What receiving records are useful for a shipment of S4005 during a Massey Ferguson MF285 workshop receiving check?

Receiving should verify the S4005 label, quantity and packaging before opening sampled cartons. Compare the 10T drive, Ø89 mm locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How should a buyer request samples and bulk pricing for S4005 in a Massey Ferguson MF285 workshop sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S4005, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

How should a workshop document a service issue involving S4005 in a Massey Ferguson MF285 workshop review?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate S4005 without assuming that every no-crank complaint originates inside the starter.

S4005 Ask for Starter Motor Export Pricing

Prepare the S4005 enquiry with the exact application, full removed-unit reference, front and terminal-side photos, quantity, destination and target date. Send it to info@elecdurauto.com so Elecdura can return a technically defined offer covering samples or bulk supply, export packing, warranty and delivery options.