0-23000-6531 Komatsu PC300-5 Starter Motor Wholesale

0-23000-6531 Komatsu PC300-5 Starter Supply for Fleet Importers

PC300 customers often search by a Nikko number while warehouse systems hold a Komatsu 600-813 reference. Starting with 0-23000-6531, PC300-5 and S6D125 lets purchasing connect both number systems to one defined heavy-unit requirement.

A 7.5kW Komatsu starter is not automatically suitable for every PC300 generation. The Ø92 engagement area, 12T pinion, three Ø17 holes, 128 mm triangular face and cable side must correspond to the removed PC300-5 unit.

 

0-23000-6531 7.5kW Ratings and 128 mm Face Dimensions

This product uses 24V, 7.5kW, 12T, module 3.175 and clockwise rotation. Module 3.175 should remain visible on the purchase order because a 12T drive with another gear geometry can still create an incorrect match.

0-23000-6531 Komatsu PC300-5 Starter Dimensions for Fleet Buyers — compare the drawing with the removed starter before placing a volume order.

Compare the Ø92 reference, 44 mm and 70 mm axial positions, three Ø17 mounting holes and three 128 mm face measurements. Straight front and side photographs help a remote buyer judge the heavy nose and solenoid clearance accurately.

 

0-23000-6531 Cross-Reference Separation for PC300-5 Orders

0-23000-6531 and 6980 connect with 600-813-3630, 4921 and 6632, plus S9271 and 18107N. Use those numbers to locate supply, then preserve PC300-5, S6D125 and the accepted 128 mm face on the quotation.

Fleet branches can reserve this item for confirmed PC300-5 demand and record the machine serial beside each issue. Later PC300 generations or S6D125 installations in another machine need their own face, drive and clearance comparison before sharing stock.

 

0-23000-6531 Heavy-Unit Packing and Electrical Testing Video

The weight and long drive housing require reinforced body supports. Sample the 12T pinion, three Ø17 holes, cable clamps, solenoid terminals, rear cap and reference marking before releasing the first lot to fleet locations.

The production video shows Elecdura starter assembly and electrical testing for export programs. PC300 parts buyers can use it to assess manufacturing support while retaining product-specific packing, receiving inspection and emergency-stock rules for 0-23000-6531.

 

0-23000-6531 Starter Motor FAQs for Komatsu PC300-5 Fleets

What PC300-5 information should be sent with an 0-23000-6531 enquiry?

For dimensional review, include the engine or machine model, old-starter numbers, mounting photographs, the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine, quantity, packing request and destination. Pair the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine with the 24V, 7.5kW, 12T, module 3.175 and CW rotation set in purchasing and receiving records.

 

Why does module 3.175 matter when the pinion has 12 teeth?

For inventory identification, use 3.175 and 12 as search references for Komatsu PC300-5 excavators with S6D125 engines, then keep the exact physical comparison attached to 0-23000-6531. This checks the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine while preserving the 24V, 7.5kW, 12T, module 3.175 and CW rotation definition for the buyer.

 

How can the Ø92 engagement area and 128 mm face be photographed accurately?

For reference review, for Komatsu PC300-5 excavators with S6D125 engines, provide straight drive-end, side, terminal and rating-label photographs, plus compartment views where housing length or cable clearance is important. For 0-23000-6531, physical evidence must support the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine and the 24V, 7.5kW, 12T, module 3.175 and CW rotation combination.

 

Can 600-813-3630 or 600-813-6632 help locate this starter?

For electrical diagnosis, yes, 600-813-3630 and 600-813-6632 can support the Komatsu PC300-5 excavators with S6D125 engines parts search, but the numbers do not prove interchangeability by themselves. Keep 0-23000-6531, the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine and 24V, 7.5kW, 12T, module 3.175 and CW rotation together from enquiry through receiving.

 

Can a PC300-6 listing prove interchangeability with the PC300-5 unit?

For incoming inspection, no. For Komatsu PC300-5 excavators with S6D125 engines, the shared reference group can support discovery, but it cannot prove that the housing, drive end and application are interchangeable. Compare the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine, then carry 24V, 7.5kW, 12T, module 3.175 and CW rotation into the purchase order and stock description.

 

What should a fleet importer inspect on the first heavy-unit shipment?

For delivery planning, start with Komatsu PC300-5 excavators with S6D125 engines, the complete 0-23000-6531 marking and clear photographs of the removed starter from matching angles. A dependable 0-23000-6531 match combines the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine with 24V, 7.5kW, 12T, module 3.175 and CW rotation, not one visible feature.

 

Which battery and cable checks should precede PC300-5 starter replacement?

For quotation preparation, check batteries under load, cable voltage drop, grounds, relay operation and the ring gear before replacing the starter matched to the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine. This ties the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine to 24V, 7.5kW, 12T, module 3.175 and CW rotation when the item moves into branch stock.

 

What delivery information helps plan urgent PC300-5 stock?

For application screening, include the engine or machine model, old-starter numbers, mounting photographs, the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine, quantity, packing request and destination. Confirm the Ø92 engagement area, 128 mm three-hole face, 12T module-3.175 drive and PC300-5 machine and keep the 24V, 7.5kW, 12T, module 3.175 and CW rotation values visible on the quotation.

 

Request 0-23000-6531 Komatsu PC300-5 Starter Wholesale Terms

Send the Komatsu PC300-5 model and serial, S6D125 engine plate, complete Nikko and Komatsu numbers, front, side and terminal images, required quantity and destination to info@elecdurauto.com. Elecdura will review 0-23000-6531 and return wholesale terms.