0-24000-3060 Komatsu PC200-6 Starter Motor 24V 5.0kW 10T

0-24000-3060 Komatsu PC200-6 Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, 0-24000-3060 should remain tied to Komatsu PC200-6, PC200-7 and PC220-6 excavators using S6D102 or 6D102 diesel engines and the exact 24V, 5.0kW, 10-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

0-24000-3060 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 0-24000-3060.

0-24000-3060 Starter Motor Distributor Specifications for Wholesale Supply

0-24000-3060 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 0-24000-3060 as the primary purchasing reference and cross-check 0-24000-3240, 600-813-4130, 600-863-4410, 19945. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

0-24000-3060 Starter Motor Bulk Fitment Approval for Bulk Procurement

Fitment control for 0-24000-3060 starts with the old starter and the application record. Compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

0-24000-3060 Starter Motor Wholesale Receiving Inspection for B2B Supply

Inspect incoming 0-24000-3060 lots against the signed sample and purchase-line specification. Check electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site.

0-24000-3060 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

0-24000-3060 Starter Motor Distributor FAQ for Fleet Replacement

Can 0-24000-3060 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 0-24000-3060, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 0-24000-3060 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for 0-24000-3060?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should 0-24000-3060 cross-references be controlled in a B2B order?

Use 0-24000-3060 as the control reference and measure and compare the complete group 0-24000-3060 / 0-24000-3240 / 600-813-4130 / 600-863-4410 / 19945. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 0-24000-3060?

Confirm the complete 0-24000-3060 / 0-24000-3240 / 600-813-4130 / 600-863-4410 / 19945 group together with the 24V, 5.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 24V, 5.0kW and 10T be checked together on 0-24000-3060?

Confirm the complete 0-24000-3060 / 0-24000-3240 / 600-813-4130 / 600-863-4410 / 19945 group together with the 24V, 5.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 0-24000-3060?

Confirm the complete 0-24000-3060 / 0-24000-3240 / 600-813-4130 / 600-863-4410 / 19945 group together with the 24V, 5.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 0-24000-3060?

Measure and compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 0-24000-3060 starters be inspected?

Tie every carton and sampled unit to 0-24000-3060, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for 0-24000-3060 Starter Motors

Send the complete reference, Komatsu PC200-6, PC200-7 and PC220-6 excavators using S6D102 or 6D102 diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.