028000-8230 Caterpillar T100C Starter Motor B2B Supplier

028000-8230 industrial forklift gasoline or diesel application Starter Motor for Distributor RFQs

For Caterpillar T100C and related forklift applications carrying Caterpillar, Hyster or Yale cross-references, 028000-8230 is the starting point for a 12V, 2.2kW, 10T, CW-rotation replacement. Buyers serving forklift electrical-parts wholesalers and material-handling service distributors should treat the engine or machine identity and the drive-end geometry as purchasing data, not after-sales troubleshooting details.

This Caterpillar, Hyster and Yale forklift group is controlled as a 12V, 2.2kW, 10T version for T100C applications, with the three-hole face and terminal clocking kept on the same order record. To prevent that outcome, Verify the complete Caterpillar/Hyster/Yale reference and 10T drive, then compare three Ø11.5 mm holes, Ø88 mm drive-end reference, 19 mm axial position and terminal clocking. The approved combination should remain on the quotation, sample label and distribution reference code.

028000-8230 Starter Motor Drive-End Dimensions for B2B Approval

Physical fitment should be documented with the labeled dimensions below, not inferred from a similar product photograph.

Verify the complete Caterpillar/Hyster/Yale reference and 10T drive, then compare three Ø11.5 mm holes, Ø88 mm drive-end reference, 19 mm axial position and terminal clocking. The image is a fitment reference and should be checked against the old starter from the job or quality-control master unit rather than scaled from the screen.

028000-8230 Starter Motor Application and Interchange Boundaries

A distributor may receive this inquiry under 028000-8230, 0280008230, 1109422, 3T5649, 6T7004, 3004017. Treat those numbers as a route into the product family, then use the application and geometry to decide whether the requested unit belongs in the 028000-8230 stock line.

This Caterpillar, Hyster and Yale forklift group is controlled as a 12V, 2.2kW, 10T version for T100C applications, with the three-hole face and terminal clocking kept on the same order record. The final cross should be stored with the customer account, measured sample and carton label so repeat orders follow the same boundary.

• Machine context: Caterpillar T100C and related forklift applications carrying Caterpillar, Hyster or Yale cross-references.

• Physical distinction: This Caterpillar, Hyster and Yale forklift group is controlled as a 12V, 2.2kW, 10T version for T100C applications, with the three-hole face and terminal clocking kept on the same order record. Verify the complete Caterpillar/Hyster/Yale reference and 10T drive, then compare three Ø11.5 mm holes, Ø88 mm drive-end reference, 19 mm axial position and terminal clocking.

• Repeat-order file: forklift electrical-parts wholesalers and material-handling service distributors should retain 028000-8230, 0280008230, 1109422, 3T5649, 6T7004 with the accepted physical comparison and customer requirement.

For Caterpillar / Hyster / Yale industrial forklift gasoline or diesel application sourcing, the retained geometry combines 3 × Ø11.5 mm mounting holes, front installation geometry: compare approved unit, Ø88 mm drive-end reference and 19 mm axial reference. Additional service identifiers include 3004017, 220007147, 220007149, 17100, LRS01787. A quotation for this line should arrive with forklift model and serial, Caterpillar/Hyster/Yale OE, old-unit power label, three-hole face image, tooth count and terminal view; that information lets forklift electrical-parts wholesalers and material-handling service distributors distinguish this configuration before stock is committed.

028000-8230 Starter Motor Lot Inspection and Supply Terms

A repeat order is only useful when it reproduces the quality-control master unit. Check the 2.2kW label required for this product record, count ten teeth and compare all three mounting ears before assigning the units to forklift stock. Photographs from different pallet positions help identify a mixed lot before it reaches branches.

For mixed starter requirements, keep 028000-8230 on its own quotation line until its sample is signed. Neutral cartons support regular distribution orders; private-label packaging can be discussed for qualified quantities without weakening the product identity.

Elecdura production and testing capability is introduced in the embedded video. Buyers should use it alongside, not instead of, the 028000-8230 application record, drawing and incoming-inspection controls.

028000-8230 Starter Motor FAQ for B2B Procurement

For industrial forklift gasoline or diesel application, how should 028000-8230 be identified when the old label is damaged?

In the industrial forklift gasoline or diesel application 028000-8230 identity file, use the industrial forklift gasoline or diesel application engine or machine record, then photograph the drive end, fixing face, side profile and electrical points. For this Caterpillar / Hyster / Yale number set, count the 10 teeth and measure the locating and axial references shown in the graphic. Within the 028000-8230 sourcing record, compare those details with 028000-8230, 0280008230, 1109422, 3T5649. In the industrial forklift gasoline or diesel application 028000-8230 identity file, a damaged label increases the importance of the physical record; it does not justify a brand-only match. For the Caterpillar / Hyster / Yale industrial forklift gasoline or diesel application item, the usable identity chain is 028000-8230, 0280008230, 1109422, 3T5649.

For industrial forklift gasoline or diesel application, which buying mistake is most likely with this starter?

For the industrial forklift gasoline or diesel application fitment, this Caterpillar, Hyster and Yale forklift group is controlled as a 12V, 2.2kW, 10T version for T100C applications, with the three-hole face and electrical point clocking kept on the same order record. In this Caterpillar / Hyster / Yale application, the control is to keep the application, unabridged OE, 12V, 2.2kW, 10T, mounting geometry and electrical point layout on the same approval sheet. For the defined 028000-8230 scope, if one item is unknown, request it before the sourcing lot rather than assuming the nearest visual match will install correctly. For industrial forklift gasoline or diesel application, the version boundary is 10T, 2.2kW, front installation geometry: compare approved unit and the complete OE group.

For industrial forklift gasoline or diesel application, can the industrial forklift gasoline or diesel application name be used as the only fitment field?

At the 10T drive check, the engine name is valuable, but it may be used in more than one machine or production version. For the 028000-8230 pinion review, combine it with the unabridged 028000-8230 or related OE, machine serial information and old-unit geometry. Within the industrial forklift gasoline or diesel application drive record, establish the unabridged Caterpillar/Hyster/Yale reference and 10T drive, then compare three Ø11.5 mm holes, Ø88 mm drive-end reference, 19 mm axial position and electrical point clocking. At the 10T drive check, that creates a controlled application boundary instead of an overly broad claim for every industrial forklift gasoline or diesel application installation. The Caterpillar / Hyster / Yale release uses 10T with CW rotation, so both details belong on the sample and carton checks.

For industrial forklift gasoline or diesel application, why does 10T need to appear on the carton?

During mounting review for 028000-8230, tooth count is a visible warehouse control that separates this unit from neighboring products before installation. At the industrial forklift gasoline or diesel application flange check, include 10T with 028000-8230 and 12V/2.2kW on internal labels and private-label artwork. For the Caterpillar / Hyster / Yale installation comparison, goods-receipt inspectors should count the pinion on test units and quarantine any carton whose product does not agree with the printed configuration. For industrial forklift gasoline or diesel application, the drawing controls are 3 × Ø11.5 mm mounting holes, front installation geometry: compare approved unit, Ø88 mm drive-end reference and 19 mm axial reference.

For industrial forklift gasoline or diesel application, how are the mounting and terminal positions approved?

Within the Caterpillar / Hyster / Yale interchange group, establish the unabridged Caterpillar/Hyster/Yale reference and 10T drive, then compare three Ø11.5 mm holes, Ø88 mm drive-end reference, 19 mm axial position and electrical point clocking. For the 028000-8230 cross-reference decision, compare the starter taken from service and test unit on a flat surface, using the fixing face as the reference plane. In the industrial forklift gasoline or diesel application stocking boundary, photograph battery and switch electrical points from the same angle. Within the Caterpillar / Hyster / Yale interchange group, keep the resulting images in the trade source SKU record so later procurement teams and warehouse staff can repeat the check without relying on memory. The working scope is Caterpillar T100C and related forklift applications carrying Caterpillar, Hyster or Yale cross-references; it is not a universal statement for every Caterpillar / Hyster / Yale machine.

For industrial forklift gasoline or diesel application, what cross-reference discipline is recommended?

For this forklift electrical-parts wholesalers and material-handling service distributors inquiry, keep 028000-8230, 0280008230, 1109422, 3T5649 visible as unabridged strings throughout inquiry, quotation and test unit review. When quoting 028000-8230, do not drop prefixes or suffixes to make a larger interchange group. For the Caterpillar / Hyster / Yale commercial request, a reference joins the 028000-8230 stock line only when the application, 10T drive, electrical rating and mounting/electrical point arrangement agree with the test unit. A practical industrial forklift gasoline or diesel application inquiry includes forklift model and serial, Caterpillar/Hyster/Yale OE, old-unit power label, three-hole face image, tooth count and terminal view.

For industrial forklift gasoline or diesel application, how should the lot be checked before customer dispatch?

At incoming inspection for 028000-8230, check the 2.2kW label required for this product record, count ten teeth and compare all three mounting ears before assigning the units to forklift stock. During the industrial forklift gasoline or diesel application lot release, inspect units from different cartons and record label accuracy, casting consistency, electrical point protection and packaging condition. For Caterpillar / Hyster / Yale warehouse acceptance, if the batch is for several branches, retain one accepted test unit or a detailed photo set centrally. At incoming inspection for 028000-8230, this reduces disputes when a later return must be compared with the original release. The receiving release for this Caterpillar / Hyster / Yale starter is the combined 10T, 3 × Ø11.5 mm mounting holes and terminal check.

For industrial forklift gasoline or diesel application, which details should a B2B buyer send for pricing?

For the 028000-8230 supply program, send forklift model and serial, Caterpillar/Hyster/Yale OE, old-unit power label, three-hole face image, tooth count and electrical point view, quantity, destination, target delivery date and neutral or private-label preference. When preparing the industrial forklift gasoline or diesel application order, put any alternate OE on a separate line and identify whether a test unit must be approved. For this Caterpillar / Hyster / Yale distributor line, this allows the quotation to cover both the commercial requirement and the exact 028000-8230 starter configuration rather than only a generic product name. The industrial forklift gasoline or diesel application commercial request should retain 028000-8230, 12V, 2.2kW, 10T, quantity, destination and packaging preference on one line.

Source 028000-8230 Starter Motors for Distributor Orders

Send forklift model and serial, Caterpillar/Hyster/Yale OE, old-unit power label, three-hole face image, tooth count and terminal view, required quantity, destination and packaging preference. Elecdura will review the 12V, 2.2kW, 10T 028000-8230 configuration and confirm sample, lead-time and wholesale-supply details before the order is released.