028000-8405 John Deere Tractor and Case Starter Motor 12V 2.7kW 13T

028000-8405 John Deere Tractor and Case Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 028000-8405 identifies a 12V, 2.7kW, 13-tooth clockwise configuration for John Deere tractors and Case, Bobcat and Clark industrial equipment using compatible diesel engines. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

028000-8405 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 028000-8405.

028000-8405 Starter Motor Distributor Specifications for Distributor Sourcing

028000-8405 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 028000-8405 as the primary purchasing reference and cross-check 028000-8406, 228000-6471, RE516157, 17362. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

028000-8405 Starter Motor Bulk Fitment Approval for B2B Supply

Before accepting 028000-8405 as a replacement, obtain the full vehicle, machine or engine record and compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

028000-8405 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Receiving control should link the carton, unit label and inspection sample to 028000-8405. Verify rating label, tooth count, mounting face, corrosion protection, terminals and lot marking; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

028000-8405 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

028000-8405 Starter Motor Distributor FAQ for Wholesale Supply

Which reference numbers should buyers confirm for 028000-8405?

Use 028000-8405 as the control reference and cross-check 028000-8406, 228000-6471, RE516157, 17362. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 028000-8405 starter motor?

The specified application is John Deere tractors and Case, Bobcat and Clark industrial equipment using compatible diesel engines. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 028000-8405?

The specified configuration is 12V, 2.7kW, 13-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 028000-8405?

028000-8405-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.7kW, 13-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

What physical fitment checks are required for 028000-8405?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a 028000-8405 bulk order?

Tie every carton and sampled unit to 028000-8405, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as 028000-8405?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.7kW rating, 13T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a 028000-8405 starter motor?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for 028000-8405?

Send 028000-8405 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Request a B2B Quote for 028000-8405 Starter Motors

Send the complete reference, John Deere tractors and Case, Bobcat and Clark industrial equipment using compatible diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.