0R9704 Caterpillar 11T Starter Motor B2B Supply

0R9704 Starter Motor Wholesale Fitment for Caterpillar equipment applications

Caterpillar aftermarket buyers need an 11-tooth 0R9704 record that can support a machine-service enquiry without turning a broad equipment reference into an automatic fitment claim.

Use 0R9704 with the equipment record and 11T requirement, then compare the three-point mounting arrangement and 74 mm drive-end reference during sample review.

0R9704 Starter Motor Technical Drawing for Distributor Approval

Technical mounting reference for comparison with the approved unit before sample or volume release.

First delivery inspection should document eleven teeth, CW rotation, drive-end condition and the 20 mm axial reference before cartons are released to Caterpillar replacement stock. The image is a comparison reference; verify the removed unit or approved sample rather than scaling dimensions from a screen.

0R9704 Starter Motor OE Control for B2B Procurement

Use 0R9704 with the equipment record and 11T requirement, then compare the three-point mounting arrangement and 74 mm drive-end reference during sample review.

A 1559849 or Denso cross-reference is useful for discovery, but it should be tied back to the exact drive end, mounting pattern and terminal layout on the removed unit.

Reference control: retain 0R9704 and every complete cross-reference with the item record.

Physical control: document the 11T drive, mounting face and terminals against the approved sample.

Stock control: keep any non-matching version on a separate quotation and SKU.

0R9704 Starter Motor Bulk Supply, Sampling and Video

Supply the Caterpillar equipment model or serial information, 0R9704 or 1559849 number, old-unit images, desired volume, delivery point and packing request for quotation.

Standard MOQ begins at 20 pieces. Neutral packing is available, and qualified private-label programs can be reviewed after the approved label, barcode, carton strength and protective inserts are confirmed for this exact item.

The video below introduces Elecdura starter-motor production and electrical-testing capability. The unit supplied under this page remains the 0R9704 configuration identified by the listed application, 11T drive and physical checks.

0R9704 Starter Motor Buyer FAQ for Wholesale Orders

Which machine and engine records should accompany a 0R9704 request for Caterpillar equipment applications?

For a fleet or equipment-stock decision, begin the 0R9704 inquiry with the complete reference and the stated Caterpillar equipment applications scope. Use 0R9704 with the equipment record and 11T requirement, then compare the three-point mounting arrangement and 74 mm drive-end reference during sample review. Keep the machine or engine record beside the 0R9704 request because a shortened number or a housing photo does not define a reliable bulk-order configuration.

Why does the 11T drive need a separate check on this 0R9704 line?

The key separator for this 0R9704 configuration is the 11T pinion with 12V, 2.2kW and CW rotation. A 1559849 or Denso cross-reference is useful for discovery, but it should be tied back to the exact drive end, mounting pattern and terminal layout on the removed unit. Count the 0R9704 teeth on the removed unit and include a drive-end photo before approving a replacement or combining adjacent references in one stock code.

How can a rental or fleet buyer use the 0R9704 mounting drawing without treating it as an installation drawing?

Use the 0R9704 technical image as a comparison aid, not as a scaled installation drawing for Caterpillar equipment applications. First delivery inspection should document eleven teeth, CW rotation, drive-end condition and the 20 mm axial reference before cartons are released to Caterpillar replacement stock. The removed starter or approved 0R9704 master sample remains the final reference for mounting face, nose profile, connection position and drive engagement.

When should the 0R9704 reference group be split into separate purchasing lines?

The references 0R9704, 1559849, 228000-8450 can locate demand for 0R9704, but they must remain tied to the defined Caterpillar equipment applications record. Use 0R9704 with the equipment record and 11T requirement, then compare the three-point mounting arrangement and 74 mm drive-end reference during sample review. If a 0R9704 physical control differs, quote it on a separate line rather than turning it into a universal interchange claim.

What should the first 0R9704 incoming sample prove before branch stock is released?

For initial 0R9704 acceptance, document the 11T drive, mounting arrangement, terminal orientation, labels and carton protection on a sample. First delivery inspection should document eleven teeth, CW rotation, drive-end condition and the 20 mm axial reference before cartons are released to Caterpillar replacement stock. The approved 0R9704 sample gives procurement and warehouse teams one consistent release definition.

Which Caterpillar equipment applications details make a 0R9704 quotation more reliable?

A useful 0R9704 enquiry needs more than a vehicle or machine name. Supply the Caterpillar equipment model or serial information, 0R9704 or 1559849 number, old-unit images, desired volume, delivery point and packing request for quotation. Those Caterpillar equipment applications details allow the supplier to review the exact 0R9704 configuration without assumptions from a broad application family.

How should Caterpillar aftermarket distributors and equipment-service suppliers prepare private-label controls for 0R9704?

Neutral cartons can support standard 0R9704 wholesale orders, while private-label work starts after label, barcode, carton strength and protective inserts are agreed for this configuration. Caterpillar aftermarket distributors and equipment-service suppliers should retain the 0R9704 version-specific references on purchase orders and warehouse labels.

What does the 0R9704 production video show, and what does it not prove?

The product video introduces Elecdura starter-motor production and testing capability; it does not establish 0R9704 fitment. For Caterpillar equipment applications, the 0R9704 release decision remains tied to the full OE reference, 11T drive and the physical comparison saved for the order.

Which 0R9704 records keep repeat fleet orders consistent?

For a repeat 0R9704 purchase, archive approved sample photos, reference list and inspection result with the item master. A 1559849 or Denso cross-reference is useful for discovery, but it should be tied back to the exact drive end, mounting pattern and terminal layout on the removed unit. That Caterpillar equipment applications record prevents the same fitment question being reopened when a customer supplies an abbreviated number or a different description.

Request 0R9704 Starter Motor Wholesale Pricing

Supply the Caterpillar equipment model or serial information, 0R9704 or 1559849 number, old-unit images, desired volume, delivery point and packing request for quotation. Elecdura will review the 12V, 2.2kW, 11T and CW configuration with the supplied application information before confirming sample, lead-time and wholesale-supply details.