10S13C 12V PV6 120mm Heavy-Duty A/C Compressor for JAC Songz

JAC Songz commercial truck Heavy-Duty A/C Compressor: A Buyer-Led Overview

This 10S13C unit is offered as a complete heavy-equipment compressor assembly for JAC Songz commercial truck, not as a loose clutch, pulley or repair component. The 12V electrical system and PV6 120mm drive describe the version being quoted. Seven-ear geometry is the safest identifier because other JAC side-port six-rib compressors use different diameters, voltage or mounts.

A/C Compressor Fitment Confirmation for Workshops and Fleet Accounts

The old unit should remain on the bench until the buyer has completed one physical comparison: count all seven housing attachment ears, confirm six ribs, 120 mm and 12V. This is especially important for fleets that source the same 10S13C body across several vehicle makes. Where no readable OE reference is available on the removed unit, buyers should lead with 10S13C, 12V, PV6 120mm, the application and clear photos of the existing assembly.

The refrigerant is not stated in the available product information. Do not infer it from another 10S13C version; confirm the vehicle or equipment A/C system before charging. Keep the ports capped until the workshop is ready, protect the clutch from impact and do not carry the assembly by its wire. Good receiving and handling practice preserves the configuration that the regional importer ordered.

Private-Label A/C Compressor Cooperation for commercial truck

For bulk orders, buyers can request neutral cartons or a customer-label presentation after the compressor identity is locked. The usual planning range is 50–100 pieces, with a 7–15 day order-planning period and an 18-month warranty. Mixed configurations should be listed as separate RFQ lines rather than combined under one model name.

Configuration Details for Wholesale A/C Compressor Review

Separating This Compressor in Distributor Inventory

Importers should keep this compressor in its own SKU lane with the voltage and pulley printed beside the application. Similar 10S13C castings may share external dimensions while using a different clutch, connector, port direction or bracket. A separate image and configuration line reduces picking errors during repeat orders.

For JAC Songz commercial truck, the order becomes specific when the buyer records seven-ear 10S13C PV6 120 mm 12V build; without it, a seller may answer with a neighboring member of the identical assembly family. To connect the commercial record with the hardware, count all seven housing attachment ears, confirm six ribs, 120 mm and 12V. That makes 10S13C, 12V and PV6 120mm actionable for procurement rather than a loose collection of technical terms. Seven-ear geometry is the safest identifier because other JAC side-port six-rib compressors use different diameters, voltage or mounts.

For this JAC Songz commercial truck line, the buying conversation should stay anchored to seven-ear 10S13C PV6 120 mm 12V build. That focus is useful at three stages: sales can quote the intended build, warehouse staff can receive the correct carton, and the workshop can compare the old compressor without interpreting an ambiguous family name. Seven-ear geometry is the safest identifier because other JAC side-port six-rib compressors use different diameters, voltage or mounts. A regional distributor that records these distinctions once can handle repeat orders faster while protecting the fleet customer from avoidable fitment delays.

Quotation Preparation for the 10S13C A/C Compressor

A useful RFQ includes the vehicle or equipment model, engine when known, voltage, pulley groove count, clutch diameter, clear front/rear/side photos and any readable OE reference. Add the required quantity, destination port, packaging preference and delivery window. This gives the price quotation team enough information to compare the request with the exact compressor.

Wholesale Questions about the JAC Songz commercial truck Heavy-Duty A/C Compressor

Which original-unit details should a fleet buyer send for this A/C compressor?

Begin with the characteristic that defines this SKU: seven-ear 10S13C PV6 120 mm 12V build. Then count all seven housing attachment ears, confirm six ribs, 120 mm and 12V. The 10S13C casting alone does not close the fitment question, because this version combines 12V, PV6 120mm and a particular physical layout for JAC Songz commercial truck. Include those observations and the intended bulk quantity in the inquiry so the response addresses this complete unit.

Why can two 10S13C heavy-duty A/C compressors look similar but not fit?

An adjacent compressor cannot be approved simply because its housing sits in the 10S13C family. Seven-ear geometry is the safest identifier because other JAC side-port six-rib compressors use different diameters, voltage or mounts. The parts-purchasing desk needs agreement on the vehicle voltage, clutch drive, refrigerant-line interface and body mounting pattern. Any mismatch among those checkpoints defines another SKU that deserves its own photograph, carton mark and quoted line.

How should an importer confirm the refrigerant and oil requirement for this A/C compressor?

The assembly in this offer has 12V and PV6 120mm. Check the electrical system on the vehicle, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Count all seven housing attachment ears, confirm six ribs, 120 mm and 12V. The right compressor case with a mismatched clutch or belt route still creates a non-fitting replacement and preventable workshop delay.

Is neutral packaging available for wholesale A/C compressor orders?

A buyer-label program can be reviewed once seven-ear 10S13C PV6 120 mm 12V build and the rest of the assembly identity have been approved. Elecdura's normal supply-planning reference is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Supply the artwork, barcode rules and packing brief, inspection expectations and destination early enough for them to appear in the quotation sheet.

What quantity and lead-time details belong in a distributor RFQ for this A/C compressor?

Build the RFQ around one unambiguous build: 10S13C for JAC Songz commercial truck, with 12V, PV6 120mm and seven-ear 10S13C PV6 120 mm 12V build. Add the volume, destination, trade term, carton style, buyer SKU, barcode and documentation request. If a second compressor does not match the drive, ports and mounting, place it on another inquiry row so quoted terms and carton preparation remain auditable.

How does Elecdura check the image against the compressor configuration?

Capture the pulley face with the camera kept square so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this JAC Songz commercial truck request, give special attention to seven-ear 10S13C PV6 120 mm 12V build. This image set gives the technical team the physical layout to review instead of extrapolating from a broad vehicle description.