7H15 24V 8PK 119 mm Heavy-Duty A/C Compressor for JAC Junling truck

Importer Guide to This 7H15 A/C Compressor

For JAC Junling truck service stock, the application name is useful only when it stays attached to the clutch and electrical details. For JAC Junling truck fleet replacement, distributor replenishment and mixed-configuration heavy-truck A/C inventory, Elecdura supplies this complete 7H15 compressor with 7H15 24V, 8PK and 119 mm configuration. The stated 24V, 8PK and 119 mm configuration remains the reference for quotation, packing and repeat stock.

Unlike a family-only listing, this offer retains JAC Junling truck and the drive as one sellable configuration; the 24V, 8PK and 119 mm specification remains the purchase reference. For JAC Junling truck, this is useful when a fleet carries several 7H15 compressors and needs each physical build separated on the order.

Importer Specification Sheet for This 7H15 A/C Compressor

The table describes one saleable assembly rather than a menu of interchangeable options for JAC Junling truck with 24V, 8PK and 119 mm. On this JAC Junling truck line, 24V belongs with the 8PK clutch and 119 mm diameter. System charge and oil values that are not published here remain subject to the approved service data for the exact installation for JAC Junling truck with 24V, 8PK and 119 mm.

Distributor Fitment Check for the JAC Junling truck A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to JAC Junling truck. The bench photographs should make each answer visible without a collage.

Compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry for JAC Junling truck. Record the result beside 24V, 8PK and 119 mm and the JAC Junling truck application so receiving can use the same evidence as purchasing.

Fleet Parts Boundaries for This 7H15 A/C Compressor

Keep other 7H15 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for JAC fitment. A buyer who records that boundary can discuss alternatives without allowing a similar housing to replace the agreed 7H15 24V, 8PK and 119 mm assembly configuration.

Alternative references can be useful for search, but they should lead back to this confirmed JAC 7H15 application build, with 24V, 8PK and 119 mm retained on the stock record. The fleet parts team still needs the clutch, head and mounting evidence before merging any stock lines.

Distributor Receiving and Service Notes for This A/C Compressor

For repeat 7H15 purchases, receiving photos create a useful history of the confirmed build. Keep the ports sealed, inspect the exposed clutch and feet, and reconcile the delivered 24V, 8PK and 119 mm unit with the JAC replacement line order.

Before installation on JAC fitment, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 7H15 unit is commissioned under the correct service procedure for 7H15 24V, 8PK and 119 mm assembly with 24V, 8PK and 119 mm.

Bulk JAC Junling truck A/C Compressor Supply for Distributors

Wholesale supply is available for this JAC 7H15 application fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this 7H15 build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting during the JAC replacement line 24V, 8PK and 119 mm review.

For container planning, state how many units of this exact 7H15 configuration are required and whether cartons need buyer marks for JAC fitment with 24V, 8PK and 119 mm. That buyer should keep any neighboring variant on a separate line for 7H15 24V, 8PK and 119 mm assembly with 24V, 8PK and 119 mm.

Distributor FAQ for the JAC Junling truck A/C Compressor

For this 7H15 build, buyers usually need clear answers on physical identity, variant control, packing and service preparation in this JAC 7H15 application 24V, 8PK and 119 mm order.

What should a wholesale RFQ include for this 7H15 compressor?

Provide JAC replacement line, 24V, 8PK and 119 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for JAC fitment.

What wrong-stock risk applies to this 8PK 7H15 compressor?

Keep other 7H15 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for 7H15 24V, 8PK and 119 mm assembly. Keep the two builds on separate quotation and warehouse lines for this JAC 7H15 application.

Why must the 8PK 119 mm clutch stay on the RFQ?

Keeping the clutch on the JAC replacement line RFQ lets the supplier compare the actual drive rather than only the 7H15 family, with 24V, 8PK and 119 mm retained on the stock record. It also gives receiving a measurable feature to check.

Which photos help confirm this JAC Junling truck compressor?

Send the clutch face, port block, connector, both mounting sides and one JAC fitment installed overview. Separate angles are easier to compare than a single collage during the 7H15 24V, 8PK and 119 mm assembly 24V, 8PK and 119 mm review.

Can this JAC Junling truck compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified this JAC 7H15 application bulk programs. The physical product is confirmed before artwork or marking details for JAC replacement line with 24V, 8PK and 119 mm.

Is the 7H15 family number enough to confirm fitment?

Treat 7H15 as a family reference. The accepted JAC fitment unit is the one whose drive and visible connection points agree with the old compressor.

How should a buyer describe this 7H15 compressor?

Start with 7H15 24V, 8PK and 119 mm assembly and 7H15; finish the identification with 24V, 8PK and 119 mm and the visible head and mounting layout. For this JAC 7H15 application, this keeps a similar compressor from inheriting the order by name alone.

How should a buyer confirm the 24V clutch?

Do not infer clutch voltage from housing shape. The bench photographs and JAC replacement line circuit information should both support the 24V unit on the RFQ.

Source This JAC Junling truck A/C Compressor for Wholesale Supply

A first enquiry should include separate clutch, head, connector and mounting photographs plus the commercial requirements in the JAC fitment 24V, 8PK and 119 mm order. Repeat buyers can reference the confirmed item record when requesting the next 7H15 shipment. A clear first enquiry also gives both parties a dependable reference if the 7H15 24V, 8PK and 119 mm assembly compressor moves from sample evaluation into regular supply.