10S13DU 12V A2 127mm Heavy-Duty A/C Compressor for JAC Shuailing X

10S13DU Heavy-Duty A/C Compressor Buying Case for JAC Shuailing X light truck

Fleet service teams usually begin with an equipment name, but importers need a tighter record. Here, the practical ordering identity is JAC Shuailing X light truck, 10S13DU, 12V and A2 127mm. Voltage is the key difference from the otherwise paired 24V JAC Shuailing X configuration.

Distributor Fitment Checkpoints Beyond the Compressor Model

A buyer can reduce chance of a wrong pick by using one minimum photo and measurement task: compare the direct mount, twin-A clutch, 127 mm diameter and 12V lead. Where no readable OE reference is available on the removed unit, buyers should lead with 10S13DU, 12V, A2 127mm, the application and clear photos of the compressor being replaced.

The refrigerant line for this assembly gives R134a. Installation approval still requires a check of the system condition, correct oil balance and any flushing requirement before commissioning a replacement compressor. The service team should investigate why the previous compressor failed and correct contamination, restriction or oil-balance issues before the unit is mounted. A correct part number cannot compensate for an A/C circuit that remains dirty or mechanically restricted.

Fleet Downtime Risk from Ordering the Wrong A/C Compressor Variant

This product should be stored as a complete assembly and counted separately from clutches, coils, pulleys and repair parts. The item image, application line and 10S13DU A2 127 mm 12V build description should stay together through supply quotation, packing and receiving.

A distribution buyer can shorten the approval cycle for JAC Shuailing X light truck by putting 10S13DU A2 127 mm 12V build at the front of the commercial description. For a repeat order, retain the earlier approval photos and again compare the direct mount, twin-A clutch, 127 mm diameter and 12V lead. The same checkpoints can be reused at commercial quote, pre-shipment inspection and receiving, keeping 10S13DU, 12V and A2 127mm tied to one build. Voltage is the key difference from the otherwise paired 24V JAC Shuailing X configuration.

For wholesalers, 10S13DU A2 127 mm 12V build is more than a technical phrase; it is the boundary of this stock item. Voltage is the key difference from the otherwise paired 24V JAC Shuailing X configuration. The same description should appear in the inquiry response, buyer confirmation and warehouse note. When those three documents use the same identity, the risk of packing a neighboring 10S13DU version drops and buyer-branded artwork can be prepared against the correct assembly.

Wholesale Specification Review: A2 127mm, 12V A/C Compressor

Private-Label Program Options for commercial truck A/C Compressors

Distributors, importers and fleet supply programs may request OEM/ODM cooperation, private labeling and unbranded cartons. Supply-planning reference normally starts at 50–100 pieces, with a 7–15 day expected dispatch window and an 18-month warranty. A final supply quotation follows the confirmed configuration and destination requirements.

RFQ Checklist for the 10S13DU Heavy-Duty A/C Compressor

For RFQ response, add the application, 10S13DU, 12V, A2 127mm, photos from several angles and the expected line-item quantity. Importers should also state whether they need neutral cartons, buyer branding, barcode labels or inspection documents. This prevents commercial details from being discussed against the wrong compressor.

Wholesale Questions about the JAC Shuailing X light truck Heavy-Duty A/C Compressor

Why is the A2 127mm detail important to A/C compressor wholesalers?

Anchor the initial review to this distinguishing feature: 10S13DU A2 127 mm 12V build. Then compare the direct mount, twin-A clutch, 127 mm diameter and 12V lead. The 10S13DU casting alone does not close the fitment question, because this version combines 12V, A2 127mm and a particular physical layout for JAC Shuailing X light truck. Include those observations and the line-item demand in the inquiry so the response addresses this complete unit.

How can fleet workshops avoid a 12V A/C compressor mismatch?

Begin with the characteristic that defines this SKU: 10S13DU A2 127 mm 12V build. Then compare the direct mount, twin-A clutch, 127 mm diameter and 12V lead. The 10S13DU casting alone does not close the fitment question, because this version combines 12V, A2 127mm and a particular physical layout for JAC Shuailing X light truck. Include those observations and the target quantity in the inquiry so the response addresses this complete unit.

Does the application name alone identify this heavy-duty A/C compressor?

Do not release a similar family member simply because its casting resembles the 10S13DU family. Voltage is the key difference from the otherwise paired 24V JAC Shuailing X configuration. The sourcing staff needs agreement on the vehicle voltage, clutch drive, connection head and bracket pattern. Any one of these differences calls for an independent SKU that deserves its own photograph, carton mark and quoted line.

What does an importer need for a private-label A/C compressor quote?

Distributor-branded packaging can be prepared once 10S13DU A2 127 mm 12V build and the rest of the assembly identity have been approved. Elecdura's normal supply-planning reference is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Include label files, barcode details and carton instructions, inspection expectations and destination early enough for them to appear in the priced proposal.

Can distributors order samples before a bulk A/C compressor program?

A sample can be discussed as a configuration-approval step before a bulk program, subject to availability and commercial terms. The buyer should still review 10S13DU A2 127 mm 12V build, 12V, A2 127mm, the connector, ports and mounting against the removed compressor. A sample approval applies only to that exact build and does not authorize substitution across the wider 10S13DU family.

How are similar 10S13DU A/C compressor variants kept separate?

Do not release a similar family member simply because its compressor is part of the 10S13DU family. Voltage is the key difference from the otherwise paired 24V JAC Shuailing X configuration. The parts-purchasing desk needs agreement on the clutch voltage, clutch drive, connection head and mounting architecture. If one checkpoint changes, the unit belongs on a different item record that deserves its own photograph, carton mark and quoted line.