110964 Atlas Copco ST35 9T Starter Motor Wholesale Supply

110964 Atlas Copco ST35 Starter Motor Sourcing for Compressor Parts Buyers

A portable compressor that will not start can stop a rental job or service crew, so an 110964 inquiry should include the ST35 serial and installed Deutz engine details from the beginning. The 9T drive and large three-hole face provide the mechanical checks.

Send the compressor and engine plates, complete old number and photographs of the pinion, face and terminals. Elecdura can compare the defined unit and return fitment and commercial information for an urgent repair or planned compressor stock.

110964 Atlas Copco ST35 Starter Motor Data for Distributor Supply

110964 9T starter motor mounting and drive-end dimensions for buyer-side comparison.

The 110964 drive end uses three Ø11 holes at 51°, 39° and 39°, an Ø110 locator, Ø145 mounting face and 26 mm axial reference. These large-face dimensions and the 9T module 3 pinion give compressor technicians clear comparison points for the stated ST35 application.

Photograph the starter while installed so cable direction, access and nearby compressor structure remain visible. Pair that view with the compressor serial and Deutz engine plate to support quotation, field replacement and later branch replenishment.

110964 Starter Motor Deutz Reference Checks for Compressor Distributors

110536, 1163669, 1164668 and 01174166 can guide the Deutz and KHD comparison. Keep the complete number from the removed starter and the Atlas Copco serial with the inquiry.

1. Confirm 12V, 2.5kW, 9 teeth, module 3 and CW.

2. Measure three Ø11 holes and the Ø110 locator.

3. Check the Ø145 face, 26 mm axial point and cable position.

110964 Starter Motor Uptime Stock for Atlas Copco Service Fleets

Compressor rental and service companies can hold 110964 stock near high-use fleets and use a central quantity for scheduled maintenance. Elecdura can review terminal protection, robust cartons and destination labels for workshops that move parts between branches.

Provide the active ST35 count, service territories, downtime priorities and reorder plan. The video below shows starter assembly and electrical testing for buyers comparing a supplier for recurring compressor support.

The production video helps Atlas Copco and Deutz service buyers assess Elecdura manufacturing and testing before arranging emergency spares and routine 110964 replenishment.

110964 Starter Motor Wholesale FAQ

Why is the Atlas Copco ST35 serial important with 110964?

The serial directs the buyer to the correct compressor parts information and helps distinguish machines that may share an ST35 name but differ by production detail. Provide it with the Deutz engine plate, old starter number and photographs. This gives Elecdura a stronger basis for discussing the 110964 configuration and service urgency.

What should be photographed before removing the ST35 starter?

Show the battery cable, switch lead, solenoid direction, nearby compressor structure and available service space. Then add clear bench photographs of the label, 9T pinion and mounting face. These views help Elecdura compare cable reach and access, which matter during field work even when the face dimensions agree.

How should Deutz 1163669 and KHD references be used?

Keep the exact Deutz or KHD number from the old starter or parts document and place it beside 110964. Confirm the ST35 application, 12V, 2.5kW, 9T drive and large three-hole face. The number group supports purchasing traceability, while the compressor and physical comparison determine whether the offered unit is suitable.

Which dimensions identify the 110964 compressor starter?

Start with the Ø110 locator and Ø145 mounting face, then verify the three Ø11 holes at 51°, 39° and 39° and the 26 mm axial point. Record direct measurements from the ST35 unit and add a square drive-end photograph. This full pattern provides more confidence than judging the motor body or solenoid finish alone.

How should an Atlas Copco service fleet handle urgent 110964 demand?

Identify the compressor that is down, its serial, Deutz engine details, location and the latest useful arrival date. Keep preventive stock on another quantity line. After the 9T large-face configuration is confirmed, Elecdura can compare urgent transport with standard replenishment so the buyer can choose the service response that protects uptime without overpaying freight on routine stock.

Can cartons be labelled for compressor service branches?

Yes. Provide branch codes, quantities, barcode format and delivery points. The technical label should retain 110964, 12V, 9T and a traceable shipment lot. Branch marks can then direct matching units to the correct service location while keeping a consistent starter identity for transfers and later replenishment.

How should urgent repairs and compressor stock be quoted together?

Show the complete 110964, Deutz or KHD reference, compressor serial, engine, quantity, destination and deadline on each line. Mark machine-down demand separately from preventive stock. Elecdura can return the confirmed 12V 2.5kW 9T CW starter price with different freight priorities, branch labels and delivery timing while keeping the technical configuration consistent.

What information supports a warranty review for 110964?

Keep the compressor identity, shipment label, installation date and the old starter used for comparison. Record battery voltage during cranking, cable condition, mounting security and pinion engagement before dismantling the unit. This gives Elecdura a clear view of the Atlas Copco ST35 installation and helps distinguish a product concern from wiring, battery, ring-gear or incorrect-application problems.

Request a 110964 Starter Motor Wholesale Quote

Send 110964, 110536, 1163669, 1164668 or 01174166, the Atlas Copco ST35 and Deutz engine plates, old-unit photographs, urgent and stock quantities, destination and deadline. Elecdura will quote the 12V 2.5kW 9T CW starter with fitment, packing and delivery options.

State which compressors are currently down and which quantities are for preventive stock so delivery priority can be separated without changing the confirmed starter configuration.