114870 Caterpillar and Perkins 104-22 Starter Motor 12V 2.0kW 11T

114870 Caterpillar and Perkins 104-22 Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, 114870 should remain tied to Caterpillar and Perkins 104-22 industrial diesel applications and the exact 12V, 2.0kW, 11-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

114870 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 114870.

114870 Starter Motor Distributor Specifications for Distributor Sourcing

114870 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 114870 as the primary purchasing reference and cross-check 2280008450, 4280006170, 19908N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

114870 Starter Motor Bulk Fitment Approval for B2B Supply

Confirm the complete 114870 / 2280008450 / 4280006170 / 19908N group together with the 12V, 2.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

114870 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

For a wholesale shipment, sample units across the 114870 lot rather than inspecting only the top carton. Compare electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

114870 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

114870 Starter Motor Distributor FAQ for Wholesale Supply

How are MOQ, samples and repeat orders managed for 114870?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 114870, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 114870 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 114870 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 114870?

Use 114870 as the control reference and measure and compare the complete group 114870 / 2280008450 / 4280006170 / 19908N. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 114870 commonly used, and what still needs confirmation?

Confirm the complete 114870 / 2280008450 / 4280006170 / 19908N group together with the 12V, 2.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 114870?

Confirm the complete 114870 / 2280008450 / 4280006170 / 19908N group together with the 12V, 2.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 114870 order?

Confirm the complete 114870 / 2280008450 / 4280006170 / 19908N group together with the 12V, 2.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 114870?

Measure and compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 114870?

Tie every carton and sampled unit to 114870, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for 114870 Starter Motors

Send the complete reference, Caterpillar and Perkins 104-22 industrial diesel applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.