116270 Suzuki Swift and Splash 1.2L Starter Motor 12V 1.2kW 10T

116270 Suzuki Swift and Splash 1.2L Starter Motor Replacement Supply for B2B Procurement

116270 is intended for procurement against Suzuki Swift and Splash 1.2L applications with a 12V, 1.2kW, 10-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

116270 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 116270.

116270 Starter Motor Distributor Specifications for Bulk Procurement

116270 Starter Motor OE Cross-Reference Review for B2B Supply

Use 116270 as the primary purchasing reference and cross-check M000T38071, M0TF0071, 31100-51K10. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

116270 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Fitment control for 116270 starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

116270 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

Inspect incoming 116270 lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

116270 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

116270 Starter Motor Distributor FAQ for Distributor Sourcing

How should a wholesale shipment of 116270 starters be inspected?

Tie every carton and sampled unit to 116270, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for 116270?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.2kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 116270 warranty claim?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 116270 wholesale quotation?

Send 116270 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can 116270 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 116270, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 116270 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for 116270?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should 116270 cross-references be controlled in a B2B order?

Use 116270 as the control reference and measure and compare the complete group 116270 / M000T38071 / M0TF0071 / 31100-51K10. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 116270?

Confirm the complete 116270 / M000T38071 / M0TF0071 / 31100-51K10 group together with the 12V, 1.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 116270 Starter Motors

Send the complete reference, Suzuki Swift and Splash 1.2L applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.