128000-2070 Yanmar 3TN78L Starter Motor 12V 2.0kW 15T

128000-2070 Yanmar 3TN78L Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, 128000-2070 should remain tied to Yanmar 3TN78L and selected John Deere, Kobelco, Komatsu, Takeuchi and Thermo King equipment and the exact 12V, 2.0kW, 15-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

128000-2070 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 128000-2070.

128000-2070 Starter Motor Distributor Specifications for Fleet Replacement

128000-2070 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 128000-2070 as the primary purchasing reference and cross-check 128000-7300, 228000-7110, 17387, 410-52180, S114-483. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

128000-2070 Starter Motor Bulk Fitment Approval for Distributor Sourcing

128000-2070-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.0kW, 15-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

128000-2070 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

For a wholesale shipment, sample units across the 128000-2070 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

128000-2070 Starter Motor MOQ and Private-Label Supply for B2B Supply

128000-2070 Starter Motor Distributor FAQ for Aftermarket Buyers

Which incoming-inspection points matter for 128000-2070?

Tie every carton and sampled unit to 128000-2070, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 128000-2070?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 15T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 128000-2070 fault from an equipment fault?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 128000-2070 RFQ technically complete?

Send 128000-2070 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 128000-2070?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 128000-2070, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 128000-2070 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 128000-2070 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 128000-2070?

Use 128000-2070 as the control reference and measure and compare the complete group 128000-2070 / 128000-7300 / 228000-7110 / 17387 / 410-52180 / S114-483. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 128000-2070 commonly used, and what still needs confirmation?

128000-2070-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.0kW, 15-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

Request a B2B Quote for 128000-2070 Starter Motors

Send the complete reference, Yanmar 3TN78L and selected John Deere, Kobelco, Komatsu, Takeuchi and Thermo King equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.