128000-2450 Isuzu 6SA1 Diesel Engine Starter Motor 24V 5.5kW 11T

128000-2450 Isuzu 6SA1 Diesel Engine Starter Motor B2B Supply for Aftermarket Buyers

128000-2450 gives aftermarket buyers a defined 24V, 5.5kW, 11-tooth clockwise configuration for Isuzu 6SA1 diesel engines in excavators, loaders and other heavy construction equipment. Link the complete reference group to the buyer’s machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

128000-2450 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 128000-2450.

128000-2450 Starter Motor Distributor Specifications for Bulk Procurement

128000-2450 Starter Motor OE Cross-Reference Review for B2B Supply

Use 128000-2450 as the primary purchasing reference and cross-check 1-81100-230-0, 18155. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

128000-2450 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Confirm the complete 128000-2450 / 1-81100-230-0 / 18155 group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

128000-2450 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

For a wholesale shipment, sample units across the 128000-2450 lot rather than inspecting only the top carton. Compare electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

128000-2450 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

128000-2450 Starter Motor Distributor FAQ for Distributor Sourcing

How can buyers separate a 128000-2450 fault from an equipment fault?

Inspect battery bank balance, cranking voltage, cable and ground drop, control relay, ring gear and engine drag before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 128000-2450 RFQ technically complete?

Send 128000-2450 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 128000-2450?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with 128000-2450, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 128000-2450 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 128000-2450 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 128000-2450?

Use 128000-2450 as the control reference and compare the complete group 128000-2450 / 1-81100-230-0 / 18155. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

Where is 128000-2450 commonly used, and what still needs confirmation?

Confirm the complete 128000-2450 / 1-81100-230-0 / 18155 group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 128000-2450?

Confirm the complete 128000-2450 / 1-81100-230-0 / 18155 group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

How should buyers handle conflicting market data for 128000-2450?

Confirm the complete 128000-2450 / 1-81100-230-0 / 18155 group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 128000-2450 Starter Motors

Send the complete reference, Isuzu 6SA1 diesel engines in excavators, loaders and other heavy construction equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.