128000-4080 Caterpillar Starter Motor 12V 2.5kW 10T

128000-4080 Caterpillar Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 128000-4080 identifies a 12V, 2.5kW, 10-tooth clockwise configuration for Caterpillar, Hyster, Yale and Daewoo forklifts using compatible Perkins industrial diesel engines. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

128000-4080 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 128000-4080.

128000-4080 Starter Motor Distributor Specifications for Fleet Replacement

128000-4080 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 128000-4080 as the primary purchasing reference and cross-check 128000-4082, 128000-8294, 7C-2264, 17399. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

128000-4080 Starter Motor Bulk Fitment Approval for Distributor Sourcing

128000-4080-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.5kW, 10-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

128000-4080 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

For a wholesale shipment, sample units across the 128000-4080 lot rather than inspecting only the top carton. Compare voltage, pinion identity, mounting clocking, solenoid terminals and carton traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

128000-4080 Starter Motor MOQ and Private-Label Supply for B2B Supply

128000-4080 Starter Motor Distributor FAQ for Aftermarket Buyers

What makes a 128000-4080 RFQ technically complete?

Send 128000-4080 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 128000-4080?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the signed-off sample with 128000-4080, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 128000-4080 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 128000-4080 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 128000-4080?

Use 128000-4080 as the control reference and compare the complete group 128000-4080 / 128000-4082 / 128000-8294 / 7C-2264 / 17399. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 128000-4080 commonly used, and what still needs confirmation?

128000-4080-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.5kW, 10-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

What specification mismatch creates the greatest risk on 128000-4080?

128000-4080-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.5kW, 10-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

How should buyers handle conflicting market data for 128000-4080?

128000-4080-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.5kW, 10-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

Which mounting details should be compared before ordering 128000-4080?

Compare the truck model, engine plate, flange, pinion projection and cable clearance with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Request a B2B Quote for 128000-4080 Starter Motors

Send the complete reference, Caterpillar, Hyster, Yale and Daewoo forklifts using compatible Perkins industrial diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.