128000-7300 Yanmar 3TNV88 Diesel Equipment Starter Motor 12V 2.0kW 15T

128000-7300 Yanmar 3TNV88 Diesel Equipment Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 128000-7300 identifies a 12V, 2.0kW, 15-tooth clockwise configuration for Yanmar 3TNV88 diesel equipment and John Deere compact tractors or skid steers including 6675 and 7775. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

128000-7300 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 128000-7300.

128000-7300 Starter Motor Distributor Specifications for Distributor Sourcing

128000-7300 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 128000-7300 as the primary purchasing reference and cross-check 129429-77010, AM877284, 18178. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

128000-7300 Starter Motor Bulk Fitment Approval for B2B Supply

Before accepting 128000-7300 as a replacement, obtain the full vehicle, machine or engine record and compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

128000-7300 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Receiving control should link the carton, unit label and inspection sample to 128000-7300. Verify rating label, tooth count, mounting face, corrosion protection, terminals and lot marking; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

128000-7300 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

128000-7300 Starter Motor Distributor FAQ for Wholesale Supply

Should a visually similar starter be sold as 128000-7300?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 15T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a 128000-7300 starter motor?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for 128000-7300?

Send 128000-7300 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for 128000-7300 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 128000-7300, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for 128000-7300 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair 128000-7300 warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which reference numbers should buyers confirm for 128000-7300?

Use 128000-7300 as the control reference and cross-check 129429-77010, AM877284, 18178. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 128000-7300 starter motor?

The specified application is Yanmar 3TNV88 diesel equipment and John Deere compact tractors or skid steers including 6675 and 7775. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 128000-7300?

The specified configuration is 12V, 2.0kW, 15-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Request a B2B Quote for 128000-7300 Starter Motors

Send the complete reference, Yanmar 3TNV88 diesel equipment and John Deere compact tractors or skid steers including 6675 and 7775, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.