128000-8170 Lister Petter Diesel Engine Starter Motor 12V 2.0kW 11T

128000-8170 Lister Petter Diesel Engine Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 128000-8170 for Lister Petter diesel engines used in forklifts, generators and compact industrial equipment, control the order by the complete reference and the 12V, 2.0kW, 11-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

128000-8170 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 128000-8170.

128000-8170 Starter Motor Distributor Specifications for Aftermarket Buyers

128000-8170 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 128000-8170 as the primary purchasing reference and cross-check 128000-8171, 757-17970, 18988. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

128000-8170 Starter Motor Bulk Fitment Approval for Wholesale Supply

Before accepting 128000-8170 as a replacement, obtain the full vehicle, machine or engine record and compare truck model, engine plate, flange, pinion projection and cable clearance. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

128000-8170 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

Receiving control should link the carton, unit label and inspection sample to 128000-8170. Verify voltage, pinion identity, mounting clocking, solenoid terminals and carton traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

128000-8170 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

128000-8170 Starter Motor Distributor FAQ for B2B Supply

Which reference numbers should buyers confirm for 128000-8170?

Use 128000-8170 as the control reference and cross-check 128000-8171, 757-17970, 18988. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 128000-8170 starter motor?

The specified application is Lister Petter diesel engines used in forklifts, generators and compact industrial equipment. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 128000-8170?

The specified configuration is 12V, 2.0kW, 11-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 128000-8170?

Confirm the complete 128000-8170 / 128000-8171 / 757-17970 / 18988 group together with the 12V, 2.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare truck model, engine plate, flange, pinion projection and cable clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for 128000-8170?

Compare the truck model, engine plate, flange, pinion projection and cable clearance with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a 128000-8170 bulk order?

Tie every carton and sampled unit to 128000-8170, the approved cross-reference set and the supplier lot. Inspect voltage, pinion identity, mounting clocking, solenoid terminals and carton traceability, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a non-starting truck can interrupt loading schedules and force an emergency service call. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as 128000-8170?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a 128000-8170 starter motor?

Check battery condition, interlock circuit, cable voltage drop, grounds and ring-gear engagement before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for 128000-8170?

Send 128000-8170 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Request a B2B Quote for 128000-8170 Starter Motors

Send the complete reference, Lister Petter diesel engines used in forklifts, generators and compact industrial equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.