18980 Cummins B3.3 Engine Starter Motor 12V 2.2kW 9T

18980 Cummins B3.3 Engine Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 18980 for Cummins B3.3 engines used in Komatsu and related industrial equipment, control the order by the complete reference and the 12V, 2.2kW, 9-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

18980 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 18980.

18980 Starter Motor Distributor Specifications for Aftermarket Buyers

18980 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 18980 as the primary purchasing reference and cross-check 18981, 428000-2650, 6008631410. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

18980 Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete 18980 / 18981 / 428000-2650 / 6008631410 group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

18980 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the 18980 lot rather than inspecting only the top carton. Compare electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

18980 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

18980 Starter Motor Distributor FAQ for B2B Supply

What specification mismatch creates the greatest risk on 18980?

Confirm the complete 18980 / 18981 / 428000-2650 / 6008631410 group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 18980 order?

Confirm the complete 18980 / 18981 / 428000-2650 / 6008631410 group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 18980?

Compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 18980?

Tie every carton and sampled unit to 18980, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 18980?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.2kW rating, 9T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 18980 fault from an equipment fault?

Check battery bank balance, cranking voltage, cable and ground drop, control relay, ring gear and engine drag prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 18980 RFQ technically complete?

Send 18980 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 18980?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 18980, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 18980 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for 18980 Starter Motors

Send the complete reference, Cummins B3.3 engines used in Komatsu and related industrial equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.