228000-112 Heavy-Duty Starter Motor 12V 1.4kW 9T

228000-112 Heavy-Duty Starter Motor Replacement Supply for B2B Procurement

228000-112 is intended for procurement against equipment identified by starter reference 228000-112 with a 12V, 1.4kW, 9-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

228000-112 should enter a wholesale catalog only after the buyer links 228000-112 / 8941702050 / 8970489662 / DSN2129 / STN4121YJ / 1-106-25W / 2-3114-2W / 17381N to equipment identified by starter reference 228000-112 and a verified sample. Record the mounting pattern, pinion reach, terminal clocking and rating label alongside the commercial terms. When another factory quotes the line, compare that complete record first; a lower price on an adjacent version does not represent the same purchasing outcome.

228000-112 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 228000-112.

228000-112 Starter Motor Distributor Specifications for Wholesale Supply

228000-112 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 228000-112 as the primary purchasing reference and cross-check 8941702050, 8970489662, DSN2129, STN4121YJ, 1-106-25W, 2-3114-2W, 17381N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-112 Starter Motor Bulk Fitment Approval for Bulk Procurement

Before accepting 228000-112 as a replacement, obtain the full vehicle, machine or engine record and compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

228000-112 Starter Motor Wholesale Receiving Inspection for B2B Supply

Receiving control should link the carton, unit label and inspection sample to 228000-112. Verify reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

228000-112 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

228000-112 Starter Motor Distributor FAQ for Fleet Replacement

Which applications should buyers confirm for the 228000-112 starter motor?

The specified application is equipment identified by starter reference 228000-112. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 228000-112?

The specified configuration is 12V, 1.4kW, 9-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 228000-112?

Confirm the complete 228000-112 / 8941702050 / 8970489662 / DSN2129 / STN4121YJ / 1-106-25W / 2-3114-2W / 17381N group together with the 12V, 1.4kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for 228000-112?

Measure and compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a 228000-112 bulk order?

Tie every carton and sampled unit to 228000-112, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as 228000-112?

A substitute is acceptable only when its complete reference relationship, 12V system, 1.4kW rating, 9T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a 228000-112 starter motor?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for 228000-112?

Send 228000-112 and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for 228000-112 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 228000-112, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Request a B2B Quote for 228000-112 Starter Motors

Send the complete reference, equipment identified by starter reference 228000-112, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.