228000-1350 Caterpillar Backhoe Loader Starter Motor 12V 2.7kW 10T

228000-1350 Caterpillar Backhoe Loader Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 228000-1350 for Caterpillar backhoe loaders, skid steers and compact loaders using Perkins 3054 or Caterpillar 3054C engines, control the order by the complete reference and the 12V, 2.7kW, 10-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

228000-1350 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-1350.

228000-1350 Starter Motor Distributor Specifications for Wholesale Supply

228000-1350 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 228000-1350 as the primary purchasing reference and cross-check 228000-1351, 0R4316, 143-0539, 17418. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-1350 Starter Motor Bulk Fitment Approval for Bulk Procurement

Fitment control for 228000-1350 starts with the old starter and the application record. Compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

228000-1350 Starter Motor Wholesale Receiving Inspection for B2B Supply

Inspect incoming 228000-1350 lots against the signed sample and purchase-line specification. Check electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site.

228000-1350 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

228000-1350 Starter Motor Distributor FAQ for Fleet Replacement

When is a cross-referenced substitute acceptable for 228000-1350?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.7kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 228000-1350 warranty claim?

Check battery bank balance, cranking voltage, cable and ground drop, control relay, ring gear and engine drag prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 228000-1350 wholesale quotation?

Send 228000-1350 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can 228000-1350 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 228000-1350, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 228000-1350 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for 228000-1350?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should 228000-1350 cross-references be controlled in a B2B order?

Use 228000-1350 as the control reference and compare the complete group 228000-1350 / 228000-1351 / 0R4316 / 143-0539 / 17418. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 228000-1350?

Confirm the complete 228000-1350 / 228000-1351 / 0R4316 / 143-0539 / 17418 group together with the 12V, 2.7kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 2.7kW and 10T be checked together on 228000-1350?

Confirm the complete 228000-1350 / 228000-1351 / 0R4316 / 143-0539 / 17418 group together with the 12V, 2.7kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 228000-1350 Starter Motors

Send the complete reference, Caterpillar backhoe loaders, skid steers and compact loaders using Perkins 3054 or Caterpillar 3054C engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.