228000-1830 Caterpillar 3054 and 3056 Starter Motor 24V 4.5kW 10T

228000-1830 Caterpillar 3054 and 3056 Starter Motor B2B Supply for Aftermarket Buyers

228000-1830 gives aftermarket buyers a defined 24V, 4.5kW, 10-tooth clockwise configuration for Caterpillar 3054 and 3056 engine equipment including selected 312D, 320D2, 420D, 420E, 914G and 924G machines. Link the complete reference group to the buyer’s machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

228000-1830 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-1830.

228000-1830 Starter Motor Distributor Specifications for Distributor Sourcing

228000-1830 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 228000-1830 as the primary purchasing reference and cross-check 228000-1831, 0R4321, 1430541, 2697368, 18505. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-1830 Starter Motor Bulk Fitment Approval for B2B Supply

Before accepting 228000-1830 as a replacement, obtain the full vehicle, machine or engine record and compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

228000-1830 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Receiving control should link the carton, unit label and inspection sample to 228000-1830. Verify electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

228000-1830 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

228000-1830 Starter Motor Distributor FAQ for Wholesale Supply

What approval sequence is recommended for 228000-1830 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 228000-1830, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for 228000-1830 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair 228000-1830 warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which reference numbers should buyers confirm for 228000-1830?

Use 228000-1830 as the control reference and cross-check 228000-1831, 0R4321, 1430541, 2697368, 18505. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 228000-1830 starter motor?

The specified application is Caterpillar 3054 and 3056 engine equipment including selected 312D, 320D2, 420D, 420E, 914G and 924G machines. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 228000-1830?

The specified configuration is 24V, 4.5kW, 10-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 228000-1830?

228000-1830-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 24V, 4.5kW, 10-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

What physical fitment checks are required for 228000-1830?

Measure and compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a 228000-1830 bulk order?

Tie every carton and sampled unit to 228000-1830, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for 228000-1830 Starter Motors

Send the complete reference, Caterpillar 3054 and 3056 engine equipment including selected 312D, 320D2, 420D, 420E, 914G and 924G machines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.