228000-2800 Heavy-Duty Starter Motor 12V 4.8kW 11T

228000-2800 Heavy-Duty Starter Motor B2B Supply for Aftermarket Buyers

228000-2800 gives aftermarket buyers a defined 12V, 4.8kW, 11-tooth clockwise configuration for equipment identified by starter reference 228000-2800. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

For repeat sourcing of 228000-2800, use 228000-2800 / 228000-2803 / 228000-2804 / 228000-9760 / 228000-9761 / 181100-299-0 / 181100-299-1 / 897500-231-0 / 897500-358-0 / 897500-358-1 / 18136N / 18136R as reference evidence and equipment identified by starter reference 228000-2800 as the application checkpoint. Neither item replaces measurement of the removed starter. Archive the approved sample photos, key dimensions, carton label and inspection date under one buyer part number so purchasing, warehouse and warranty teams work from the same physical definition.

228000-2800 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 228000-2800.

228000-2800 Starter Motor Distributor Specifications for Bulk Procurement

228000-2800 Starter Motor OE Cross-Reference Review for B2B Supply

Use 228000-2800 as the primary purchasing reference and cross-check 228000-2803, 228000-2804, 228000-9760, 228000-9761, 181100-299-0, 181100-299-1, 897500-231-0, 897500-358-0, 897500-358-1, 18136N, 18136R. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-2800 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Fitment control for 228000-2800 starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

228000-2800 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

Inspect incoming 228000-2800 lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

228000-2800 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

228000-2800 Starter Motor Distributor FAQ for Distributor Sourcing

Which system checks should precede a 228000-2800 warranty claim?

Inspect battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 228000-2800 wholesale quotation?

Send 228000-2800 and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can 228000-2800 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with 228000-2800, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 228000-2800 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for 228000-2800?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should 228000-2800 cross-references be controlled in a B2B order?

Use 228000-2800 as the control reference and compare the complete group 228000-2800 / 228000-2803 / 228000-2804 / 228000-9760 / 228000-9761 / 181100-299-0 / 181100-299-1 / 897500-231-0 / 897500-358-0 / 897500-358-1 / 18136N / 18136R. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

What engine or equipment data is required for 228000-2800?

Confirm the complete 228000-2800 / 228000-2803 / 228000-2804 / 228000-9760 / 228000-9761 / 181100-299-0 / 181100-299-1 / 897500-231-0 / 897500-358-0 / 897500-358-1 / 18136N / 18136R group together with the 12V, 4.8kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 4.8kW and 11T be checked together on 228000-2800?

Confirm the complete 228000-2800 / 228000-2803 / 228000-2804 / 228000-9760 / 228000-9761 / 181100-299-0 / 181100-299-1 / 897500-231-0 / 897500-358-0 / 897500-358-1 / 18136N / 18136R group together with the 12V, 4.8kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 228000-2800?

Confirm the complete 228000-2800 / 228000-2803 / 228000-2804 / 228000-9760 / 228000-9761 / 181100-299-0 / 181100-299-1 / 897500-231-0 / 897500-358-0 / 897500-358-1 / 18136N / 18136R group together with the 12V, 4.8kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 228000-2800 Starter Motors

Send the complete reference, equipment identified by starter reference 228000-2800, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.