228000-2970 New Holland Compact Tractor Starter Motor 12V 2.0kW 11T

228000-2970 New Holland Compact Tractor Starter Motor B2B Supply for Aftermarket Buyers

228000-2970 gives aftermarket buyers a defined 12V, 2.0kW, 11-tooth clockwise configuration for New Holland compact tractors and Ford or Case industrial equipment using compatible diesel engines. Link the complete reference group to the buyer’s machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

228000-2970 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-2970.

228000-2970 Starter Motor Distributor Specifications for Fleet Replacement

228000-2970 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 228000-2970 as the primary purchasing reference and cross-check SBA18508-6520, 18139. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-2970 Starter Motor Bulk Fitment Approval for Distributor Sourcing

228000-2970-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.0kW, 11-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

228000-2970 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

For a wholesale shipment, sample units across the 228000-2970 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

228000-2970 Starter Motor MOQ and Private-Label Supply for B2B Supply

228000-2970 Starter Motor Distributor FAQ for Aftermarket Buyers

How should buyers handle conflicting market data for 228000-2970?

228000-2970-family variants can differ in rating, tooth count, rotation or drive-end details. Confirm the complete label and suffix, the 12V, 2.0kW, 11-tooth clockwise configuration and the physical geometry against the removed unit. Keep the accepted sample and photos with the purchase record before repeat supply.

Which mounting details should be compared before ordering 228000-2970?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 228000-2970?

Tie every carton and sampled unit to 228000-2970, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 228000-2970?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample prior to changing the purchase line. Retain materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 228000-2970 fault from an equipment fault?

Inspect battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 228000-2970 RFQ technically complete?

Send 228000-2970 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 228000-2970?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with 228000-2970, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 228000-2970 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 228000-2970 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Request a B2B Quote for 228000-2970 Starter Motors

Send the complete reference, New Holland compact tractors and Ford or Case industrial equipment using compatible diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.