228000-4630 John Deere combines Starter Motor 12V 4.0kW 10T

228000-4630 John Deere combines Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of 228000-4630 starts with the 12V, 4.0kW, 10-tooth clockwise configuration and the stated use in John Deere combines and equipment using the RE501294 starter family. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

228000-4630 Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-4630.

228000-4630 Starter Motor Distributor Specifications for B2B Supply

228000-4630 Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use 228000-4630 as the primary purchasing reference and cross-check 228000-4631, RE501294. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-4630 Starter Motor Bulk Fitment Approval for Fleet Replacement

Confirm the complete 228000-4630 / 228000-4631 / RE501294 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

228000-4630 Starter Motor Wholesale Receiving Inspection for Wholesale Supply

For a wholesale shipment, sample units across the 228000-4630 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

228000-4630 Starter Motor MOQ and Private-Label Supply for Distributor Sourcing

228000-4630 Starter Motor Distributor FAQ for Bulk Procurement

Can 228000-4630 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 228000-4630 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 228000-4630?

Use 228000-4630 as the control reference and compare the complete group 228000-4630 / 228000-4631 / RE501294. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 228000-4630 commonly used, and what still needs confirmation?

Confirm the complete 228000-4630 / 228000-4631 / RE501294 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 228000-4630?

Confirm the complete 228000-4630 / 228000-4631 / RE501294 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 228000-4630 order?

Confirm the complete 228000-4630 / 228000-4631 / RE501294 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 228000-4630?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 228000-4630?

Tie every carton and sampled unit to 228000-4630, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 228000-4630?

A substitute is acceptable only when its complete OE relationship, 12V system, 4.0kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Request a B2B Quote for 228000-4630 Starter Motors

Send the complete reference, John Deere combines and equipment using the RE501294 starter family, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.