228000-5142 Isuzu 4JG2 and 4JB1 Diesel Starter Motor 12V 2.0kW 9T

228000-5142 Isuzu 4JG2 and 4JB1 Diesel Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, 228000-5142 should remain tied to Isuzu 4JG2 and 4JB1 diesel engines used in light trucks and compact industrial equipment and the exact 12V, 2.0kW, 9-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

228000-5142 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-5142.

228000-5142 Starter Motor Distributor Specifications for Wholesale Supply

228000-5142 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 228000-5142 as the primary purchasing reference and cross-check 228000-5140, 8-97120-356-0, 897178289, STR70184. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-5142 Starter Motor Bulk Fitment Approval for Bulk Procurement

Fitment control for 228000-5142 starts with the old starter and the application record. Compare VIN or chassis record, engine, production range, mounting face, pinion and cable route, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

228000-5142 Starter Motor Wholesale Receiving Inspection for B2B Supply

Inspect incoming 228000-5142 lots against the signed sample and purchase-line specification. Check label and suffix, voltage, power, teeth, mounting clocking, terminal layout and carton traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming a wrong unit can create roadside downtime, a repeat workshop job and expensive urgent transport.

228000-5142 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

228000-5142 Starter Motor Distributor FAQ for Fleet Replacement

Can 228000-5142 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 228000-5142, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 228000-5142 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for 228000-5142?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should 228000-5142 cross-references be controlled in a B2B order?

Use 228000-5142 as the control reference and measure and compare the complete group 228000-5142 / 228000-5140 / 8-97120-356-0 / 897178289 / STR70184. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 228000-5142?

Confirm the complete 228000-5142 / 228000-5140 / 8-97120-356-0 / 897178289 / STR70184 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN or chassis record, engine, production range, mounting face, pinion and cable route against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 2.0kW and 9T be checked together on 228000-5142?

Confirm the complete 228000-5142 / 228000-5140 / 8-97120-356-0 / 897178289 / STR70184 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN or chassis record, engine, production range, mounting face, pinion and cable route against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 228000-5142?

Confirm the complete 228000-5142 / 228000-5140 / 8-97120-356-0 / 897178289 / STR70184 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN or chassis record, engine, production range, mounting face, pinion and cable route against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 228000-5142?

Measure and compare the VIN or chassis record, engine, production range, mounting face, pinion and cable route with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 228000-5142 starters be inspected?

Tie every carton and sampled unit to 228000-5142, the approved cross-reference set and the supplier lot. Inspect label and suffix, voltage, power, teeth, mounting clocking, terminal layout and carton traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong unit can create roadside downtime, a repeat workshop job and expensive urgent transport. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for 228000-5142 Starter Motors

Send the complete reference, Isuzu 4JG2 and 4JB1 diesel engines used in light trucks and compact industrial equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.