228000-6870 Case MX-series Tractor Starter Motor 12V 4.0kW 10T

228000-6870 Case MX-series Tractor Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 228000-6870 identifies a 12V, 4.0kW, 10-tooth clockwise configuration for Case MX-series tractors, loaders and sprayers using Cummins 6B diesel engines. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

228000-6870 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-6870.

228000-6870 Starter Motor Distributor Specifications for Bulk Procurement

228000-6870 Starter Motor OE Cross-Reference Review for B2B Supply

Use 228000-6870 as the primary purchasing reference and cross-check 228000-6871, 259720A1, 257920A1. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-6870 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Confirm the complete 228000-6870 / 228000-6871 / 259720A1 / 257920A1 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

228000-6870 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

For a wholesale shipment, sample units across the 228000-6870 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

228000-6870 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

228000-6870 Starter Motor Distributor FAQ for Distributor Sourcing

Can a similar 12V starter replace 228000-6870?

A substitute is acceptable only when its complete OE relationship, 12V system, 4.0kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 228000-6870 fault from an equipment fault?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 228000-6870 RFQ technically complete?

Send 228000-6870 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 228000-6870?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 228000-6870, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 228000-6870 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 228000-6870 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 228000-6870?

Use 228000-6870 as the control reference and compare the complete group 228000-6870 / 228000-6871 / 259720A1 / 257920A1. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 228000-6870 commonly used, and what still needs confirmation?

Confirm the complete 228000-6870 / 228000-6871 / 259720A1 / 257920A1 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 228000-6870?

Confirm the complete 228000-6870 / 228000-6871 / 259720A1 / 257920A1 group together with the 12V, 4.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 228000-6870 Starter Motors

Send the complete reference, Case MX-series tractors, loaders and sprayers using Cummins 6B diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.