228000-6920 Bobcat Compact Excavator Starter Motor 12V 2.0kW 10T

228000-6920 Bobcat Compact Excavator Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 228000-6920 for Bobcat compact excavators and loaders using Kubota V2003, V2203 and D1703 diesel engines, control the order by the complete reference and the 12V, 2.0kW, 10-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

228000-6920 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-6920.

228000-6920 Starter Motor Distributor Specifications for Fleet Replacement

228000-6920 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 228000-6920 as the primary purchasing reference and cross-check 428000-2070, 6681858, 6670727, 18447. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-6920 Starter Motor Bulk Fitment Approval for Distributor Sourcing

Confirm the complete 228000-6920 / 428000-2070 / 6681858 / 6670727 / 18447 group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

228000-6920 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

For a wholesale shipment, sample units across the 228000-6920 lot rather than inspecting only the top carton. Compare electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

228000-6920 Starter Motor MOQ and Private-Label Supply for B2B Supply

228000-6920 Starter Motor Distributor FAQ for Aftermarket Buyers

What specification mismatch creates the greatest risk on 228000-6920?

Confirm the complete 228000-6920 / 428000-2070 / 6681858 / 6670727 / 18447 group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

How should buyers handle conflicting market data for 228000-6920?

Confirm the complete 228000-6920 / 428000-2070 / 6681858 / 6670727 / 18447 group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 228000-6920?

Compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 228000-6920?

Tie every carton and sampled unit to 228000-6920, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 228000-6920?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 228000-6920 fault from an equipment fault?

Check battery bank balance, cranking voltage, cable and ground drop, control relay, ring gear and engine drag prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 228000-6920 RFQ technically complete?

Send 228000-6920 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 228000-6920?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 228000-6920, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 228000-6920 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for 228000-6920 Starter Motors

Send the complete reference, Bobcat compact excavators and loaders using Kubota V2003, V2203 and D1703 diesel engines, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.