281001520 Hino EX300 24V Starter Motor Wholesale

281001520 Hino EX300 Starter Supply for Project Spare Distributors

Construction-equipment downtime makes a vague Hino starter quotation expensive. Pairing 281001520 with EX300, EK100 or EK200 machine details and the large mounting geometry gives project buyers enough information to compare stock before it leaves the warehouse.

The 28100-1520 family is sold under several output descriptions in the market. For this item, retain the supplier-stated 6.0kW value and compare the three Ø16 holes, long drive end, housing and terminal arrangement against the removed starter.

281001520 6.0kW Ratings and Ø184 Mounting Drawing

This product is defined as 24V, 6.0kW, 11T, module 3.5 and clockwise rotation. The higher-output definition and larger pinion module should remain visible from enquiry through commissioning, especially when project documents contain shortened legacy numbers.

281001520 Hino EX300 Starter Dimensions for Project Spares — compare the drawing with the removed starter before placing a volume order.

The drawing highlights an Ø184 face, Ø122 locating reference, three Ø16 holes, 42 mm and 68 mm axial positions, and 43.5-degree, 37.5-degree and 101-degree orientations. Use scaled measurements from the old unit for comparison.

281001520 Application Matching for EK100 EK200 Equipment

281001520 and its A-D suffixes connect with 281001472, 281001740A, 281001780 variants and Sawafuji numbers. These support sourcing, while the named machine, 6.0kW rating and accepted large-face image define the ordered item.

Project distributors should list the exact Hino machine or engine beside each requested quantity. EX300 excavator spares and EK100/EK200 vehicle demand can share the product only after the mounting face and electrical definition match the same accepted sample.

281001520 Project Packing and Production Testing Video

Heavy units need rigid packing support around the nose and body, protected terminals and clear gross-weight labeling. First-lot receiving should sample the Ø184 face, 11T pinion, rating plate and no-load test result before site allocation.

The production video shows Elecdura starter assembly and electrical testing for B2B supply. Project teams can assess manufacturing support alongside their requirements for 281001520 traceability, reinforced packing, inspection records and phased jobsite delivery.

281001520 Starter Motor FAQs for Hino Project Buyers

Why should a 281001520 request name EX300, EK100 or EK200?

For quotation preparation, include the engine or machine model, old-starter numbers, mounting photographs, the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine, quantity, packing request and destination. This ties the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine to 24V, 6.0kW, 11T, module 3.5 and CW rotation when the item moves into branch stock.

Which power value should buyers use for this supplied product?

For application screening, start with Hino EX300, EK100 and EK200 equipment, the complete 281001520 marking and clear photographs of the removed starter from matching angles. Confirm the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine and keep the 24V, 6.0kW, 11T, module 3.5 and CW rotation values visible on the quotation.

What measurements define the large 281001520 mounting face?

For dimensional review, compare the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine with the removed starter, using the drawing and square photographs rather than judging the housing from one angled view. Pair the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine with the 24V, 6.0kW, 11T, module 3.5 and CW rotation set in purchasing and receiving records.

How should 281001472 and 281001780 be used in sourcing?

For inventory identification, start with Hino EX300, EK100 and EK200 equipment, the complete 281001520 marking and clear photographs of the removed starter from matching angles. This checks the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine while preserving the 24V, 6.0kW, 11T, module 3.5 and CW rotation definition for the buyer.

What old-unit evidence is useful for a remote project shipment?

For reference review, start with Hino EX300, EK100 and EK200 equipment, the complete 281001520 marking and clear photographs of the removed starter from matching angles. For 281001520, physical evidence must support the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine and the 24V, 6.0kW, 11T, module 3.5 and CW rotation combination.

How should this heavy starter be packed for jobsite delivery?

For electrical diagnosis, start with Hino EX300, EK100 and EK200 equipment, the complete 281001520 marking and clear photographs of the removed starter from matching angles. Keep 281001520, the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine and 24V, 6.0kW, 11T, module 3.5 and CW rotation together from enquiry through receiving.

What should be sampled before 281001520 units reach the site?

For incoming inspection, start with Hino EX300, EK100 and EK200 equipment, the complete 281001520 marking and clear photographs of the removed starter from matching angles. Compare the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine, then carry 24V, 6.0kW, 11T, module 3.5 and CW rotation into the purchase order and stock description.

Which project details help Elecdura prepare 281001520 pricing?

For delivery planning, include the engine or machine model, old-starter numbers, mounting photographs, the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine, quantity, packing request and destination. A dependable 281001520 match combines the Ø184 face, three Ø16 holes, 11T module-3.5 drive and named Hino machine with 24V, 6.0kW, 11T, module 3.5 and CW rotation, not one visible feature.

Request 281001520 Hino Heavy-Equipment Starter Pricing

Send the Hino EX300, EK100 or EK200 details, engine plate, full starter numbers, mounting measurements, photographs, project quantity and destination to info@elecdurauto.com. Elecdura will review 281001520 and prepare project-spares pricing.