3266A00100 Mitsubishi S4S Starter Motor Wholesale Supply

3266A00100 Mitsubishi / Caterpillar Starter Motor Identification for Wholesale Buyers

3266A00100 is intended for Mitsubishi S4S and S4E industrial engines used in forklifts and selected Caterpillar equipment. For forklift-parts distributors and Mitsubishi industrial-engine service suppliers, the commercial value is a clearly bounded replacement that can move from inquiry to sample and repeat order without losing the engine, OE or physical version that was originally approved.

The S4S service channel contains visually similar starters with different ratings and nose dimensions; this 12V, 2.0kW, 10T version must remain tied to its 3266A group and measured mounting geometry. Verify 3266A00100 or its complete cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle. That record gives purchasing, sales and inbound product-control team one traceable definition when the same demand reaches them under different service numbers.

3266A00100 Starter Motor Specifications and Mounting Data for B2B Sourcing

Use the technical image to compare the approved mounting and drive-end controls before a sample or inventory order is released.

Verify 3266A00100 or its complete cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle. The image is a fitment reference and should be checked against the take-off unit from the equipment or retained golden sample rather than scaled from the screen.

3266A00100 Starter Motor OE Boundaries for Distributor Stock

The usable interchange group starts with 3266A00100, 3266A00101, 3266A00600, 3266A00601, 3266A26100. Those references are valuable for locating stock, but the release remains conditional on the S4S / S4E or machine record and the physical controls shown above.

The S4S service channel contains visually similar starters with different ratings and nose dimensions; this 12V, 2.0kW, 10T version must remain tied to its 3266A group and measured mounting geometry. Before consolidating customer numbers into one SKU, verify 3266A00100 or its complete cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle.

• Fitment boundary: Mitsubishi S4S and S4E industrial engines used in forklifts and selected Caterpillar equipment.

• Interchange focus: The S4S service channel contains visually similar starters with different ratings and nose dimensions; this 12V, 2.0kW, 10T version must remain tied to its 3266A group and measured mounting geometry. Verify 3266A00100 or its complete cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle.

• Buyer record: forklift-parts distributors and Mitsubishi industrial-engine service suppliers should retain 3266A00100, 3266A00101, 3266A00600, 3266A00601, 3266A26100 with the accepted physical comparison and customer requirement.

For Mitsubishi / Caterpillar S4S / S4E sourcing, the retained geometry combines Hole 1 / Hole 2: 10.5 mm, 115 mm hole circle, 10T drive and Engagement C 89 mm / H 24 mm. Additional service identifiers include 32A66-00100, 32A66-01100, M2T62271, M2T62272, CAT 1039827, 18163N. A quotation for this line should arrive with complete 3266A or 32A66 number, S4S/S4E engine label, forklift or machine model, measured hole circle, nose depth and terminal images; that information lets forklift-parts distributors and Mitsubishi industrial-engine service suppliers distinguish this configuration before stock is committed.

3266A00100 Starter Motor Sampling, Packing and Wholesale Supply

Measure at least one unit from each sampled carton because the S4S service channel includes multiple Mitsubishi families that can look interchangeable at first glance. Record the sample result against the warehouse identity and customer account before the lot becomes available to sales.

Standard wholesale MOQ begins at 20 pieces. Neutral packing is available, and qualified private-label programs can be reviewed after the product label, barcode, carton strength and protective inserts have been approved for this exact reference.

The video below shows Elecdura starter-motor production and electrical testing. It demonstrates supply capability; the product purchased under this page remains the 3266A00100 configuration defined by the OE, application and physical checks above.

3266A00100 Starter Motor FAQ for B2B Procurement

For S4S / S4E, what proves that an inquiry belongs to the 3266A00100 group?

In the S4S / S4E 3266A00100 identity file, the strongest working record combines a full reference such as 3266A00100, 3266A00101, 3266A00600, 3266A00601, the S4S / S4E or machine identity, 12V/2.0kW, 10T, CW and a matching physical master unit. For this Mitsubishi / Caterpillar number set, no single field should override a visible mismatch. Within the 3266A00100 sourcing record, store the final cross with the customer and SKU so later orders reproduce the same product definition. For the Mitsubishi / Caterpillar S4S / S4E item, the usable identity chain is 3266A00100, 3266A00101, 3266A00600, 3266A00601.

For S4S / S4E, what customer downtime risk does this page address?

For the S4S / S4E fitment, the S4S service channel contains visually similar starters with different ratings and nose dimensions; this 12V, 2.0kW, 10T version must remain tied to its 3266A group and measured mounting geometry. In this Mitsubishi / Caterpillar application, a starter that arrives with the wrong drive or installation flange creates another service interruption even if the invoice number looks plausible. For the defined 3266A00100 scope, cross-check 3266A00100 or its full cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle. For the S4S / S4E fitment, completing that check before dispatch is less costly than freight, labor and a delayed machine restart after installation begins. For S4S / S4E, the version boundary is 10T, 2.0kW, 115 mm hole circle and the complete OE group.

For S4S / S4E, how should the take-off unit from the equipment be measured?

At the 10T drive check, clean the installation flange, count the pinion teeth and measure the locating diameter, hole layout, nose depth and pinion rest position from consistent reference surfaces. For the 3266A00100 pinion review, photograph the connections and solenoid orientation. Within the S4S / S4E drive record, use the technical graphic to organize those readings, but keep the starter taken from service or master unit as the physical authority for 3266A00100. The Mitsubishi / Caterpillar release uses 10T with CW rotation, so both details belong on the sample and carton checks.

For S4S / S4E, which 3266A00101 details should remain on the order?

During mounting review for 3266A00100, retain the full reference including prefixes and suffixes, then add the S4S / S4E application and 10T configuration. At the S4S / S4E flange check, the alternate can be listed beside 3266A00100 after the master unit agrees, but it should not replace the primary customer-supplied number. For the Mitsubishi / Caterpillar installation comparison, this preserves traceability when purchasing, receiving and after-sales teams review the order. For S4S / S4E, the drawing controls are Hole 1 / Hole 2: 10.5 mm, 115 mm hole circle, 10T drive and Engagement C 89 mm / H 24 mm.

For S4S / S4E, what is checked before sample sign-off?

Within the Mitsubishi / Caterpillar interchange group, cross-check 12V, 2.0kW, 10T and CW; then cross-check 3266A00100 or its full cross-reference, count ten teeth, and measure engagement C 89 mm, drive distance H 24 mm, two 10.5 mm holes and 115 mm hole circle. For the 3266A00100 cross-reference decision, inspect insulation, connection hardware and pinion protection as well. In the S4S / S4E stocking boundary, the master unit should carry a unique label and photographs so the production lot can be compared against the same electrical and physical standard. The working scope is Mitsubishi S4S and S4E industrial engines used in forklifts and selected Caterpillar equipment; it is not a universal statement for every Mitsubishi / Caterpillar machine.

For S4S / S4E, how can sales staff qualify this application efficiently?

For this forklift-parts distributors and Mitsubishi industrial-engine service suppliers inquiry, ask for full 3266A or 32A66 number, S4S/S4E engine label, forklift or machine model, measured hole circle, nose depth and connection images. When quoting 3266A00100, these fields are specific enough for technical review but practical for a repair shop or fleet customer to provide. For the Mitsubishi / Caterpillar commercial request, avoid asking only whether the machine is a Mitsubishi / Caterpillar; the detailed record separates this 3266A00100 starter from visually similar alternatives and supports a confident commercial response. A practical S4S / S4E inquiry includes complete 3266A or 32A66 number, S4S/S4E engine label, forklift or machine model, measured hole circle, nose depth and terminal images.

For S4S / S4E, what should inbound product-control team do with a mixed carton?

At incoming inspection for 3266A00100, stop the release and isolate the affected cartons. During the S4S / S4E lot release, measure at least one unit from each sampled carton because the S4S service channel includes multiple Mitsubishi families that can look interchangeable at first glance. For Mitsubishi / Caterpillar warehouse acceptance, compare labels, tooth count, flange and connections against the master unit, then document quantities by variant. At incoming inspection for 3266A00100, do not relabel or merge the units until purchasing and technical staff cross-check whether the variation is acceptable or belongs to another product code. The receiving release for this Mitsubishi / Caterpillar starter is the combined 10T, Hole 1 / Hole 2: 10.5 mm and terminal check.

For S4S / S4E, are sample and private-label orders supported?

For the 3266A00100 supply program, a master unit can be arranged when fitment confirmation is needed before inventory order. When preparing the S4S / S4E order, standard MOQ begins at 20 pieces, and qualified private-label programs can be reviewed after the 3266A00100, 10T, barcode and carton protection are approved. For this Mitsubishi / Caterpillar distributor line, include quantity, destination and artwork requirements with the technical RFQ to receive aligned commercial terms. The S4S / S4E commercial request should retain 3266A00100, 12V, 2.0kW, 10T, quantity, destination and packaging preference on one line.

Request a 3266A00100 Starter Motor Wholesale Quote

Send complete 3266A or 32A66 number, S4S/S4E engine label, forklift or machine model, measured hole circle, nose depth and terminal images, required quantity, destination and packaging preference. Elecdura will review the 12V, 2.0kW, 10T 3266A00100 configuration and confirm sample, lead-time and wholesale-supply details before the order is released.