428000-2730 Toyota Passenger Vehicle Starter Motor 12V 2.0kW 9T

428000-2730 Toyota Passenger Vehicle Starter Motor B2B Supply for Aftermarket Buyers

428000-2730 gives aftermarket buyers a defined 12V, 2.0kW, 9-tooth clockwise configuration for Toyota passenger and light-commercial applications using the 28100-33040 or 28100-33070 starter family. Link the complete reference group to the buyer’s machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

428000-2730 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 428000-2730.

428000-2730 Starter Motor Distributor Specifications for Fleet Replacement

428000-2730 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 428000-2730 as the primary purchasing reference and cross-check 28100-33040, 28100-33070, 33193. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

428000-2730 Starter Motor Bulk Fitment Approval for Distributor Sourcing

Confirm the complete 428000-2730 / 28100-33040 / 28100-33070 / 33193 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors against the removed unit or approved sample and keep the signed sample with the purchase record.

428000-2730 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

For a wholesale shipment, sample units across the 428000-2730 lot rather than inspecting only the top carton. Compare OE label, electrical specification, pinion, flange, terminals, finish and batch packaging with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

428000-2730 Starter Motor MOQ and Private-Label Supply for B2B Supply

428000-2730 Starter Motor Distributor FAQ for Aftermarket Buyers

How can distributors reduce disputes on 428000-2730 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 428000-2730?

Use 428000-2730 as the control reference and compare the complete group 428000-2730 / 28100-33040 / 28100-33070 / 33193. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

Where is 428000-2730 commonly used, and what still needs confirmation?

Confirm the complete 428000-2730 / 28100-33040 / 28100-33070 / 33193 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 428000-2730?

Confirm the complete 428000-2730 / 28100-33040 / 28100-33070 / 33193 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors against the removed unit or approved sample and keep the signed sample with the purchase record.

How should buyers handle conflicting market data for 428000-2730?

Confirm the complete 428000-2730 / 28100-33040 / 28100-33070 / 33193 group together with the 12V, 2.0kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 428000-2730?

Compare the VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 428000-2730?

Tie every carton and sampled unit to 428000-2730, the approved cross-reference set and the supplier lot. Inspect OE label, electrical specification, pinion, flange, terminals, finish and batch packaging, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an incorrect variant causes returns, repeated labor and avoidable damage to buyer confidence. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 428000-2730?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.0kW rating, 9T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample prior to changing the purchase line. Retain materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 428000-2730 fault from an equipment fault?

Inspect battery state, cranking voltage, cable and ground resistance, control circuit and ring-gear condition before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

Request a B2B Quote for 428000-2730 Starter Motors

Send the complete reference, Toyota passenger and light-commercial applications using the 28100-33040 or 28100-33070 starter family, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.