428000-3310 Yanmar 3TNV70 and 3TNV80F Starter Motor 12V 1.4kW 15T

428000-3310 Yanmar 3TNV70 and 3TNV80F Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 428000-3310 for Yanmar 3TNV70 and 3TNV80F engines in compact excavators and John Deere equipment, control the order by the complete reference and the 12V, 1.4kW, 15-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

428000-3310 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 428000-3310.

428000-3310 Starter Motor Distributor Specifications for Bulk Procurement

428000-3310 Starter Motor OE Cross-Reference Review for B2B Supply

Use 428000-3310 as the primary purchasing reference and cross-check DSN2142, CST40361AS, STR70346, 255119, 106720, 119450-77010. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

428000-3310 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Confirm the complete 428000-3310 / DSN2142 / CST40361AS / STR70346 / 255119 / 106720 / 119450-77010 group together with the 12V, 1.4kW, 15-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

428000-3310 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

For a wholesale shipment, sample units across the 428000-3310 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

428000-3310 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

428000-3310 Starter Motor Distributor FAQ for Distributor Sourcing

Can a similar 12V starter replace 428000-3310?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.4kW rating, 15T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 428000-3310 fault from an equipment fault?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 428000-3310 RFQ technically complete?

Send 428000-3310 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 428000-3310?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 428000-3310, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 428000-3310 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 428000-3310 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 428000-3310?

Use 428000-3310 as the control reference and compare the complete group 428000-3310 / DSN2142 / CST40361AS / STR70346 / 255119 / 106720 / 119450-77010. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 428000-3310 commonly used, and what still needs confirmation?

Confirm the complete 428000-3310 / DSN2142 / CST40361AS / STR70346 / 255119 / 106720 / 119450-77010 group together with the 12V, 1.4kW, 15-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 428000-3310?

Confirm the complete 428000-3310 / DSN2142 / CST40361AS / STR70346 / 255119 / 106720 / 119450-77010 group together with the 12V, 1.4kW, 15-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 428000-3310 Starter Motors

Send the complete reference, Yanmar 3TNV70 and 3TNV80F engines in compact excavators and John Deere equipment, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.