600-813-1730 Komatsu PC60 4D95 Starter Motor Distributor

600-813-1730 Starter Supply for Komatsu PC60 Distributors

PC60 repair orders often need a compact starter quickly, but a nearby 24V family can look similar in photographs. Starting with 600-813-1730, the 12V system, 9T pinion and two-ear face keeps the distributor quotation specific.

The host machine and electrical voltage must agree before the unit is supplied. A 4D95 engine name alone cannot distinguish 12V and 24V equipment, so include the old label, battery arrangement and direct terminal photograph.

600-813-1730 12V 2.2kW 9T Drive and Ø120 Mounting Data

This product uses 12V, 2.2kW, 9T, module 3 and CW rotation. The compact electrical rating and drive set should remain on the bin label so it is not mixed with larger 24V PC60 starters.

600-813-1730 Komatsu PC60 Starter Dimensions for Distributor Orders — compare the drawing with the removed starter before placing a volume order.

Compare the 95 mm engagement reference, 20 mm gear distance, two Ø13 holes and Ø120 mounting circle. The open pinion, two-ear face and solenoid orientation should match the removed unit before dispatch.

600-813-1730 Nikko 0-23000-0170 Reference Matching

600-813-1730/1731/1732 and Nikko 0-23000-0170/0171/0172 form the useful purchasing group. Retain the complete OE, PC60 model, 4D95 engine and 12V system on customer orders and cartons.

A distributor can support several PC60 serial ranges after the first fitment for each group has been photographed and measured. Keep those accepted views with replenishment records so an urgent request does not rely on model name alone.

600-813-1730 Compact Excavator Stock and Diagnostic Checks

For first-lot inspection, count nine teeth, measure both mounting holes, inspect the solenoid studs and compare the label. Pack the compact drive end away from carton walls and cover the terminals during branch transfer.

The production video follows Elecdura starter assembly and electrical test procedures. PC60 distributors can use it when defining sample inspection, compact-unit packaging, neutral labels and delivery schedules for 600-813-1730.

600-813-1730 Starter FAQs for Komatsu PC60 Buyers

What should confirm a 12V PC60 requirement?

Provide the PC60 model and serial, 4D95 engine plate, battery arrangement, old starter label and straight mounting and terminal views. State the required quantity and service deadline. These details confirm that the machine needs the 12V 600-813-1730 product rather than a similar 24V PC60 starter.

Which two-ear dimensions should a buyer compare?

Measure the 95 mm engagement reference, 20 mm distance to the drive gear, both Ø13 holes and the Ø120 mounting circle. Photograph the face square-on and include a side view. The open pinion and solenoid orientation should also match the removed unit before shipment begins.

Why should 9T and module 3 be recorded together?

Nine teeth identifies the pinion count, while module 3 describes tooth size and form. Both must agree with the ring gear. Keeping them together prevents another compact starter with the same voltage and hole pattern but a different drive from being selected for a PC60 repair.

Can 0-23000-0170 be used as the purchasing number?

It can lead buyers to the correct reference family, but the order should also include 600-813-1730, PC60, 4D95 and 12V 2.2kW 9T. Add the accepted two-ear face and terminal view so the Nikko number does not redirect an urgent order to another compact equipment application.

How much 600-813-1730 stock should a distributor hold?

Base reserve on supported PC60 population, recent sales, repair lead time and the cost of machine downtime. Separate workshop demand from branch emergency stock. Label bins with 12V and the two-ear face, then review withdrawals by machine serial so replenishment follows actual service use by machine group.

What first-shipment checks suit this compact starter?

Inspect the 9T pinion, both mounting holes, Ø120 face, solenoid studs, terminal caps and rating label across several cartons. Compare the units with accepted photographs. Check that packing keeps the drive end away from the carton wall and that no cable is pinched by body supports.

What should technicians test before condemning the starter?

Check battery state under load, voltage drop across positive and ground cables, start-command voltage and engine mechanical resistance. Inspect the ring gear after removal. These measurements separate a defective 600-813-1730 from weak batteries, corroded cables, poor grounding, switch faults or a tight engine during cranking.

What belongs in a 600-813-1730 distributor enquiry?

Send PC60 and 4D95 identifiers, battery voltage, complete OE group, front and terminal photographs, quantity, annual demand, destination and required delivery date. Note whether the order is immediate repair stock or scheduled replenishment. Elecdura can then review the 12V compact version and provide distributor terms.

Request 600-813-1730 Komatsu PC60 Starter Distributor Pricing

Send the PC60 model and serial, 4D95 plate, battery voltage, complete old-starter numbers, mounting and terminal photographs, quantity and destination to info@elecdurauto.com. Elecdura will review the 12V version and provide distributor terms.