6008134311 Komatsu PC500 S6D140 Starter Motor Wholesale

6008134311 PC500 Starter Supply for Mining Parts Importers

A PC500 starter may be requested under 6008134311, 6008139320 or a Nikko 023000 number. The S6D140 engine, 12T module-3.175 drive and Ø146 face turn that list into a clear high-value stock decision.

Other Komatsu 11kW starters can share an Ø92 locating section while using another pinion or axial position. Compare the 25/46 mm dimensions, three-point face and cable clearance before accepting a substitute for PC500.

6008134311 12T Specification and Ø146 Mounting Drawing

This unit is specified at 24V, 11.0kW, 12T, module 3.175 and CW. The power and pinion combination should stay visible on purchasing, receiving and remote-site inventory descriptions.

6008134311 Komatsu PC500 S6D140 Starter Dimensions for Mining Buyers — compare the drawing with the removed starter before placing a volume order.

Use the drawing to check the Ø92 locating reference, 25 mm and 46 mm axial positions and Ø146 triangular envelope. Include the nose, upper terminals and side clearance in the product-photo comparison.

6008134311 Reference Matching for S6D140 Fleet Purchasing

6008134311/9320 and Nikko 0230007670/7730/7731/8020 form the useful search group. Retain PC500, S6D140 and the accepted face with whichever number starts the wholesale enquiry for traceable sourcing.

Mining distributors can assign this line to confirmed PC500 demand and keep PC360 or other S6D140 requests separate until their machine and mounting data agree. That prevents emergency inventory from drifting between costly heavy units.

6008134311 Remote-Site Packing and Electrical Test Video

Reinforced export packing should carry the body and shield both the nose and terminal end. First-lot sampling can verify the 12T pinion, Ø146 face, cable fasteners, solenoid studs and rating label before remote deployment.

Elecdura's starter video shows production and electrical testing for B2B orders. PC500 buyers can assess supply capability while defining 6008134311-specific packing, test documents, spare ratios and delivery schedules.

6008134311 Starter Motor FAQs for Komatsu PC500 Buyers

What PC500 information should accompany a 6008134311 enquiry?

Include the excavator model and serial, S6D140 engine plate, complete old-starter marking and straight mounting, side and terminal photographs. Confirm 24V, 11kW, 12T and module 3.175. The combined information keeps the request specific to the PC500 installation rather than a broad heavy Komatsu starter family.

Why are the 25 mm and 46 mm positions important?

They describe where the pinion and drive-end features sit relative to the mounting face. Compare both positions with the removed unit together with the Ø92 locating section and Ø146 envelope. This helps distinguish 6008134311 from other 11kW Komatsu starters that can look similar in a general side photograph.

Can 0230007670 and 0230008020 support the search?

Both Nikko numbers belong to the useful 6008134311 sourcing group. They should remain linked to PC500, S6D140, 12T module 3.175 and the accepted drive end. If a seller uses one number for another Komatsu machine, compare dimensions before treating that listing as the same physical product.

Should PC360-7 and PC500 use one 11kW stock line?

Only after the physical starter, pinion and mounting data are confirmed for both machine groups. The safer approach is to keep PC500 and PC360-7 demand separate while comparing their primary OEs and drawings. This prevents a costly emergency starter from being allocated by power rating and shared cross-reference alone.

What should a remote mine site check when receiving 6008134311?

Compare the carton label, 12T pinion, Ø92 locating area, mounting face, cable fastening, terminal caps and rating label with the accepted product. Inspect the carton for impact or moisture. Photograph any difference before installation so the supplier and fleet team can review the same evidence.

How can a distributor plan PC500 spare quantities?

Separate emergency units, planned overhaul demand and branch replenishment, then add lead time and fleet size. Keep 6008134311 and the PC500 serial range visible in the forecast. This produces a more useful quantity discussion than applying one generic percentage to every S6D140 machine in the customer's fleet.

How should the heavy 6008134311 starter be protected?

Support the motor body at stable points, guard the drive end, cover the terminals and keep cable loops away from the carton wall. Use moisture-resistant wrapping where sea freight is involved. The package should tolerate branch transfers without shifting the starter or loading the nose and solenoid.

What commercial details belong in a 6008134311 request?

Send the PC500 model and serial, S6D140 plate, full OE and Nikko list, accepted product photographs, quantity, annual forecast, delivery target, packing preference and destination. Include any mine-site labeling or documentation need. Elecdura will review the configuration and prepare wholesale pricing around those requirements and delivery priorities.

Request 6008134311 PC500 Starter Motor Wholesale Pricing

Email the Komatsu PC500 model and serial, S6D140 plate, complete OE list, drive-end and terminal photographs, quantity, packing needs and destination to info@elecdurauto.com. Elecdura will review 6008134311 and prepare wholesale pricing.