87040161 Case/New Holland Starter Motor Wholesale Supply

87040161 Industrial Starter Motor Version Checks for Distributor Orders

References 87040161, 87040161R, 428000-3140, 280001690 and 19855N may lead to this starter family. The quotation should state the selected 2.5kW rating and keep the Case/New Holland machine record attached.

If an old invoice, reman label or online offer states 2.7kW, do not blend it into the order silently. Compare the rating plate, pinion, Ø129 face, 18/27 mm axial points and terminals, then decide whether the buyer needs a separate version.

87040161 Starter Motor Specifications and B2B Fitment Drawing

87040161 10T starter motor mounting and drive-end dimensions for buyer sample comparison.

Case and New Holland buyers should pay particular attention to the asymmetric mounting face because 87040161 offers can carry more than one power description. The Ø129 face, Ø88 locating reference and 18/27 mm axial points help keep the stated 12V 2.5kW version physically identifiable.

Measure the removed starter and include a straight view of all three mounting positions. If the old-unit label calls for another output, treat it as a separate request; do not change the rating while preserving the same purchasing line.

87040161 Starter Motor Supply for Skid-Steer and Rental-Fleet Buyers

Skid-steer dealers can approve the starter on one identified machine before stocking units for workshops. Elecdura can supply neutral cartons for normal orders and review private-label labels when the part number, rating and artwork remain technically accurate.

Rental fleets should retain the accepted machine serial and sample photographs. At receiving, compare the 10T drive, offset mounting casting and terminal clearance. This record makes it easier to replenish the same 2.5kW version even when different 87040161 descriptions remain online.

The video introduces Elecdura starter-motor manufacturing and electrical testing. For a useful 87040161 proposal, provide the exact machine details, old-unit rating and photos; Elecdura can then return the selected product, sample requirements, packaging and lead time.

87040161 Case/New Holland Starter Motor Help for Equipment Dealers

87040161 is used in Case and New Holland industrial-equipment sourcing, including skid-steer service. This product is specified as 12V, 2.5kW and 10 teeth. The machine model and complete number are important because the public market also contains 87040161 offers described with another power rating.

Send the machine plate, old-unit label and photographs of the drive end, offset mounting face and terminals. Elecdura will compare those points before quoting, so the buyer receives a clearly stated 2.5kW configuration instead of an unspecified substitute.

87040161 Starter Motor Wholesale FAQ

Why must the power rating be written on an 87040161 order?

Public replacement offers may describe 87040161 with different power outputs. This product is specified as 12V and 2.5kW, so the quotation and purchase order should state that value. Compare it with the old-unit label and machine requirement. If the customer needs a 2.7kW version, keep it as a separate inquiry rather than changing the specification silently.

Which machines can be considered for 87040161 review?

The reference is used across Case and New Holland industrial and skid-steer equipment, but buyers should provide the exact machine model, serial or PIN and engine information. A broad brand list is not enough. Elecdura needs those machine details to compare the mounting face, drive end and terminals before confirming whether this 2.5kW unit is suitable.

How should 87040161R be handled in a wholesale inquiry?

The R suffix commonly indicates a remanufactured service reference and can help locate the starter family. Preserve the suffix and describe whether the old unit is new or reman. Then verify the power rating, 10-tooth pinion, mounting face and terminals. Do not remove the suffix and assume that every 87040161 or 87040161R product has identical output.

What physical points identify the offset mounting face?

Use a straight face photograph to compare the asymmetric ear positions, Ø129 reference and Ø11 mounting holes. Measure the 18 mm and 27 mm axial points and note the solenoid clocking. These details are useful when two Denso-style starters share a similar body but place one ear or cable terminal differently in the crowded skid-steer compartment.

What should be checked during an 87040161 sample installation?

Verify the machine battery and cables, seat the mounting face without force, confirm pinion engagement and check terminal clearance with the equipment structure. Record cranking voltage, noise and photographs after installation. If the power label differs from the quotation or the cables must be stretched or rerouted, pause the trial and review the version before placing stock.

How can rental fleets keep 87040161 versions separate?

Create a record for each machine group that includes the serial range, old-unit label, power rating, photographs and accepted sample. Use a distinct internal SKU when a 2.5kW and 2.7kW version are both operated. This prevents a central store from issuing the first visually similar starter and gives claims staff a clear installation history.

What receiving inspection suits a skid-steer starter shipment?

Open cartons from different parts of the shipment and verify full references, 2.5kW labels, 10-tooth pinions, offset castings and terminal protection. Compare one unit with the signed sample and record the lot. Hold any carton marked with another power output or face style before workshops receive it, avoiding downtime and avoidable freight claims.

What should an importer send for an 87040161 quote?

Provide the complete reference, Case or New Holland machine model and serial, engine details, old-unit power label and photographs, quantity, destination and desired date. State the required carton and barcode arrangement. Elecdura can then quote the specified 12V 2.5kW 10T version with sample, lead-time, warranty and labeling information clearly separated.

Request an 87040161 Starter Motor Wholesale Quote

Send 87040161 or the full related number, Case/New Holland machine model and serial, old-unit rating and photographs, quantity, destination and packaging request. Elecdura will quote the specified 12V 2.5kW 10T version and clearly state the sample checks.

Put 2.5kW on the RFQ and attach the old label so the requested output is visible to both sales and purchasing teams. Elecdura can then quote this defined version with sample checks, delivery schedule and carton identification kept separate from other ratings.