8980844070 Hitachi ZX160LC-3 4JJ1 Starter Motor Wholesale

8980844070 Starter Motor Buying for Hitachi Excavator Distributors

Excavator enquiries may begin with Hitachi ZX160LC-3, an Isuzu 4JJ1 engine or the number 8980844070. A precise offer combines all three identities with the specified 12V 2.5kW 11T configuration and measurable drive-end positions.

Send the machine serial, engine plate, complete old label and photographs of the three-point face and terminal side. Elecdura can then quote a unit that field technicians can compare before mobilizing to a job site, reducing a costly second service visit.

8980844070 Starter Motor Engagement Drawing for Excavator Buyers

The 8980844070 technical drawing specifies two Ø12 holes with a third mounting position, an Ø127 mounting-position circle, 89 mm engagement and a 47 mm distance to the drive gear. These values give excavator buyers measurable checkpoints while leaving the unspecified third-position diameter for direct measurement.

Compare the drive-end measurements with the removed ZX160LC-3 unit and keep the machine serial and 4JJ1 engine plate beside the result. Add a terminal-side photograph so the field technician can confirm cable access before carrying the starter to the excavator.

8980844070 Starter Motor Cross-Reference Checks for Excavator Stock

Isuzu 8980844070 and 8-98084-407-0 connect with Denso 428000-5920 and Dixie 246-25186. The group is concise, but the excavator and engine identity still matter because 4JJ1 equipment can use different installations.

1. Confirm ZX160LC-3 or ZAXIS 160LC-3 and the machine serial.
2. Verify 12V, 2.5kW, 11T and CW.
3. Compare 89 mm engagement, 47 mm drive position and the mounting circle.

8980844070 Starter Motor Wholesale Support for Field-Service Fleets

Construction fleets can confirm one unit on an identified excavator and keep the machine serial, engine plate and installation result with the warehouse item. For remote job sites, pack the starter so the nose, terminals and connector remain protected through multiple freight transfers.

1. Check unit labels before dispatch to the field.
2. Include mounting and terminal photographs in the technician pack.
3. Inspect a selected unit from every shipment lot before it enters service stock.

The video shows Elecdura starter-motor assembly and testing. Send the Hitachi model and serial, 4JJ1 details, old-unit images, quantity and delivery site for a focused commercial quotation.

8980844070 Starter Motor Wholesale FAQ

Which application connects Hitachi ZX160LC-3 with Isuzu 8980844070?

The Hitachi excavator uses an Isuzu 4JJ1 engine, and 8980844070 identifies the related starter assembly within this application group. Send the Hitachi machine serial and Isuzu engine plate together with the old starter number. The machine, engine and part identity provide a stronger fitment basis than any one brand name by itself.

Which mounting dimensions do the 89 mm and 47 mm values describe?

The technical drawing specifies 89 mm for engagement and 47 mm for the distance to the drive gear. Compare both values directly with the removed starter and note the 11-tooth pinion position. These axial checks help detect a drive-end difference that could still exist even if the mounting points appear to align.

How should buyers verify the third mounting position?

The technical drawing specifies two mounting-hole diameters at Ø12 and shows a third position without a separate diameter value. Confirm all positions on the removed unit and measure the third directly. A straight photograph and direct measurement let the buyer compare the complete three-point face without treating the unspecified position as a stated dimension.

Why is the excavator serial required for this 4JJ1 application?

The 4JJ1 engine appears in more than one equipment application, and the engine name alone cannot describe the installed mounting and cable arrangement. The Hitachi serial narrows the exact machine. Pair it with the engine plate, old label and face photographs so Elecdura can quote the intended 8980844070 configuration.

How can a distributor reduce a second field-service visit?

Confirm the complete reference, machine serial, 11-tooth drive, engagement dimensions, mounting face and terminal side before dispatch. Put the comparison photographs and measurements in the technician pack. A few minutes of warehouse checking can prevent a remote technician arriving with a starter that bolts differently or places the cables incorrectly.

What packing is suitable for delivery to a job site?

Use rigid internal support, protect the pinion and mounting face, cap the battery and switch terminals and prevent the starter moving inside the carton. If the shipment will change carriers, add moisture protection and durable labels. Inspect the package before final dispatch because field locations may lack replacement packing or handling equipment.

What receiving checks suit excavator spare inventory?

Verify 8980844070 or the agreed cross-reference, 12V marking, 11 teeth, mounting face, connector, terminals and packing across units from different carton positions. Compare one selected unit with the 89 mm and 47 mm measurements and note the lot. Isolate any variation before the starter is assigned to a job site.

What information supports an 8980844070 wholesale quotation?

Send the complete Isuzu, Denso or Dixie number, Hitachi model and machine serial, 4JJ1 engine plate, old-unit label and photographs, quantity by site, delivery country, target date and packing needs. Elecdura can then state the specified 12V 2.5kW 11T unit, MOQ, normal lead time, warranty and field-delivery options.

Request a 8980844070 Starter Motor Wholesale Quote

Send 8980844070 or the complete Denso or Dixie reference, Hitachi ZX160LC-3 machine serial, Isuzu 4JJ1 engine details, old-unit photographs, quantity, destination and packing requirements. Elecdura will quote the 12V 2.5kW 11T starter with field-fitment and delivery terms.

For multiple job sites, list the excavator serial and required spare quantity by location so dispatch labels remain specific to the confirmed 4JJ1 installation.