8980924640
8980924640 / 8980924641 / 428000-5930 / 428000-5931 / 428000-5932
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
8980924640 / 8980924641 / 428000-5930 / 428000-5931 / 428000-5932
Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine
Confirm 12V, 3.0kW, 11T, CCW, 2 × Ø15 mounting holes, Ø94 drive-end locating reference, 18 mm and 42 mm axial references, mounting orientation and terminal layout against the removed starter before volume supply.
| Availability: | |
|---|---|
| Quantity: | |
For Isuzu commercial-truck distributors and fleet repair depots, the cost of an incorrect unit includes workshop time, freight and a second removal. The same 4HK1 engine family serves several North American and global truck badges, while the wide Ø163 face and CCW direction identify the required physical version. Prepare the distributor enquiry around 8980924640 and Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, then add the measured drive-end and terminal identity instead of relying on a general equipment name.
Send the full 8980924640 or related OE, truck badge, VIN or chassis, 4HK1-TC engine confirmation, removed-unit label, drive-end and terminal photographs, quantity, destination and wanted arrival. Elecdura can compare the stated 12V, 3.0kW, 11T and CCW specification with the pictured drive-end geometry, then return stock timing plus distributor conditions suitable for cross-badge Isuzu 4HK1 fleet coverage.
Primary OE reference | 8980924640 |
Target application | Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine |
Voltage and output | 12V / 3.0kW |
Pinion, module and rotation | 11T / module 3 / CCW |
Mounting-hole reference | 2 × Ø15 mounting holes; opposed two-point mounting orientation |
Drive-end reference | Ø94 drive-end locating reference; 18 mm and 42 mm axial references; Ø163 mounting-circle reference |
OE and cross-reference group | 8980924640 / 8980924641 / 428000-5930 / 428000-5931 / 428000-5932 |
Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
Warranty | 18 months under agreed sales terms |
8980924640 Isuzu 12V 3.0kW 11T starter mounting dimensions for buyer-side comparison.
For cross-badge Isuzu 4HK1 fleet coverage, the drawing identifies 2 × Ø15 mounting holes with opposed two-point mounting orientation. Its Ø94 drive-end locating reference, 18 mm and 42 mm axial references and Ø163 mounting-circle reference give Isuzu commercial-truck distributors and fleet repair depots practical bench measurements when the old unit and replacement candidate have similar assembly outlines.
At the Isuzu 4HK1 truck-side check, count the 11-tooth pinion and confirm module 3 with CCW rotation. Frame the flange squarely and add the wiring side so Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock can detect a cable-position or mounting-ear mismatch that a label-only search misses.
8980924640 reference use: 8980924640 / 8980924641 / 428000-5930 / 428000-5931 / 428000-5932 build the parts-search reference set. Trace the family with those reference numbers, but the final order should state the truck badge and chassis while retaining 8980924640, CCW rotation and the wide two-hole face.
Branch release: When the shipment arrives, verify CCW marking, 11T pinion, two Ø15 holes, Ø163 face, Isuzu label and cable orientation against the catalog entry for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine. Retain the 8980924640 incoming batch and a checked arrival image. Place accepted stock only in the bin serving Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock.
Set the 8980924640 stocking level for Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock by reviewing the installed base for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, recent fleet demand and transfer time. Keep cross-badge Isuzu 4HK1 fleet coverage emergencies separate from scheduled 8980924640 replenishment.
When the shipment arrives, verify CCW marking, 11T pinion, two Ø15 holes, Ø163 face, Isuzu label and cable orientation against the catalog entry for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine. Retain the 8980924640 incoming batch and a checked arrival image. Place accepted stock only in the bin serving Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. For later cross-badge Isuzu 4HK1 fleet coverage replenishment, retain the carton identity and incoming batch with the maintenance record for Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock so a buyer can repeat the correct 8980924640 configuration while retaining its equipment identity.
For cross-badge Isuzu 4HK1 fleet coverage, the video presents Elecdura production plus electrical testing of starters as one part of supplier assessment. An 8980924640 purchase still requires the buyer to state the truck badge and chassis while retaining 8980924640, CCW rotation and the wide two-hole face, then state quantity, destination and delivery requirements.
Before removing and replacing 8980924640 on Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, record the battery load-test result, loaded circuit-loss results on the supply and return paths, starter-command voltage and ring-gear surface. Log the observed no-crank event in the truck maintenance history. With the original starter removed from Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, Isuzu commercial-truck distributors and fleet repair depots should also inspect mounting surfaces, terminal condition and drive-gear engagement. For cross-badge Isuzu 4HK1 fleet coverage, that service evidence separates starter demand from battery, cable, ground, starter-command or ring-gear problems and gives any later inspection review a factual starting point. The same 4HK1 engine family serves several North American and global truck badges, while the wide Ø163 face and CCW direction identify the required physical version. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
Set the 8980924640 stocking level for Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock by reviewing the installed base for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, recent fleet demand and transfer time. Keep cross-badge Isuzu 4HK1 fleet coverage emergencies separate from scheduled 8980924640 replenishment. To set the 8980924640 initial dealer volume, Isuzu commercial-truck distributors and fleet repair depots should map the operating population of Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, recent demand, dealer transfer interval and equipment-down cost. Provide Elecdura with the release forecast and destination split so production and shipment planning reflect cross-badge Isuzu 4HK1 fleet coverage. The same 4HK1 engine family serves several North American and global truck badges, while the wide Ø163 face and CCW direction identify the required physical version. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
When the shipment arrives, verify CCW marking, 11T pinion, two Ø15 holes, Ø163 face, Isuzu label and cable orientation against the catalog entry for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine. Retain the 8980924640 incoming batch and a checked arrival image. Place accepted stock only in the bin serving Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. For cross-badge Isuzu 4HK1 fleet coverage, Isuzu commercial-truck distributors and fleet repair depots should compare units sampled across the shipment with the confirmed 11T CCW drive end. Hold any unit with a conflicting label, damaged terminal, altered flange or different pinion outside Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock while the 8980924640 lot is reviewed. Set the 8980924640 stocking level for Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock by reviewing the installed base for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, recent fleet demand and transfer time. Keep cross-badge Isuzu 4HK1 fleet coverage emergencies separate from scheduled 8980924640 replenishment. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
Identify Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, the 8980924640 incoming batch, installation date, operating hours and observed no-crank event. For Isuzu commercial-truck distributors and fleet repair depots, loaded battery voltage, positive- and ground-cable loss readings and starter-command readings should accompany photographs of the old and supplied labels, pinion, installation flange and terminals. Note any handling or environmental conditions that may affect Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, especially those related to cross-badge Isuzu 4HK1 fleet coverage. Before removing and replacing 8980924640 on Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, record the battery load-test result, loaded circuit-loss results on the supply and return paths, starter-command voltage and ring-gear surface. Log the observed no-crank event in the truck maintenance history. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
The same 4HK1 engine family serves several North American and global truck badges, while the wide Ø163 face and CCW direction identify the required physical version. For Isuzu commercial-truck distributors and fleet repair depots, a useful 8980924640 purchase combines the stated specification and measured nose and flange with availability, packing, dealer-network positioning and commercial turnaround. Keeping 8980924640 tied to Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine gives sales, receiving and service staff one repeatable purchasing and support identity for cross-badge Isuzu 4HK1 fleet coverage, rather than an over-broad starter family label. Set the 8980924640 stocking level for Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock by reviewing the installed base for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine, recent fleet demand and transfer time. Keep cross-badge Isuzu 4HK1 fleet coverage emergencies separate from scheduled 8980924640 replenishment. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
Send the full 8980924640 or related OE, truck badge, VIN or chassis, 4HK1-TC engine confirmation, removed-unit label, drive-end and terminal photographs, quantity, destination and wanted arrival. For cross-badge Isuzu 4HK1 fleet coverage, Elecdura can compare the catalog 12V, 3.0kW, 11T CCW starter with Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine and return MOQ, lead time, packing, warranty and shipping terms. For 8980924640, state quantity split by stocking location, required arrival date, label-and-pack request and destination. Identify urgent cross-badge Isuzu 4HK1 fleet coverage demand separately from routine Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. The same 4HK1 engine family serves several North American and global truck badges, while the wide Ø163 face and CCW direction identify the required physical version. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
For this sourcing decision, Isuzu commercial-truck distributors and fleet repair depots should state the truck badge and chassis while retaining 8980924640, CCW rotation and the wide two-hole face. The 8980924640 fitment drawing for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine identifies 2 × Ø15 mounting holes, opposed two-point mounting orientation, Ø94 drive-end locating reference, 18 mm and 42 mm axial references and Ø163 mounting-circle reference. When Isuzu commercial-truck distributors and fleet repair depots compare those points, a square drive-end photograph and visible wiring side are stronger selection evidence than a look-alike body or incomplete reference. When the shipment arrives, verify CCW marking, 11T pinion, two Ø15 holes, Ø163 face, Isuzu label and cable orientation against the catalog entry for Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine. Retain the 8980924640 incoming batch and a checked arrival image. Place accepted stock only in the bin serving Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
8980924640 / 8980924641 / 428000-5930 / 428000-5931 / 428000-5932 build the parts-search reference set. Trace the family with those reference numbers, but the final order should state the truck badge and chassis while retaining 8980924640, CCW rotation and the wide two-hole face. Keep Isuzu NPR, NQR, NRR and related Chevrolet or GMC trucks using the 4HK1-TC 5.2L engine on the same cross-badge Isuzu 4HK1 fleet coverage enquiry so the alias does not lose its installed application context. For Isuzu commercial-truck distributors and fleet repair depots, any different output, pinion, rotation, installation flange or terminal layout remains outside the 8980924640 supply scope until it receives its own application identity. For 8980924640, state quantity split by stocking location, required arrival date, label-and-pack request and destination. Identify urgent cross-badge Isuzu 4HK1 fleet coverage demand separately from routine Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. The practical result is correct 8980924640 supply with fewer avoidable equipment-down events.
For 8980924640 pricing in Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock, send the full 8980924640 or related OE, truck badge, VIN or chassis, 4HK1-TC engine confirmation, removed-unit label, drive-end and terminal photographs, quantity, destination and wanted arrival. Elecdura will quote the catalog-specified 12V, 3.0kW, 11T CCW starter motor with MOQ, availability, packaging, warranty and freight details suited to cross-badge Isuzu 4HK1 fleet coverage.
For 8980924640, state quantity split by stocking location, required arrival date, label-and-pack request and destination. Identify urgent cross-badge Isuzu 4HK1 fleet coverage demand separately from routine Isuzu NPR and NQR fleet maintenance, independent truck workshops and distributor stock. For Isuzu commercial-truck distributors and fleet repair depots, any urgent field-down unit should be stated separately so the reply can distinguish immediate availability from scheduled replenishment for cross-badge Isuzu 4HK1 fleet coverage.