Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Denso-Type 12V 2.2kW CW
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Denso-type vehicle, tractor and industrial replacement programs
Confirm battery-terminal position, mounting face, pinion position, rotation and terminals against the removed unit or approved sample.
| Quantity: | |
|---|---|
The commercial value of Denso-Type 12V 2.2kW CW depends on linking its available specification to a repeatable fitment record.
Denso-type vehicle, tractor and industrial replacement programs is the working supply scope. Confirm Denso-Type 12V 2.2kW CW plus removed-unit photos and dimensions, battery-terminal position, mounting geometry, pinion position and terminal access before releasing distributor stock.
This capability video covers the manufacturing context. It does not replace the buyer's dimensional, electrical and application approval for the ordered starter motor.
Specification | B2B ordering control for Denso-Type 12V 2.2kW CW |
Product identity | Denso-Type 12V 2.2kW CW |
OE / reference control | Denso-Type 12V 2.2kW CW plus removed-unit photos and dimensions |
Application scope | Denso-type vehicle, tractor and industrial replacement programs |
System voltage | 12V |
Rated power | 2.2kW |
Pinion | Confirm against approved sample |
Rotation | CW / clockwise |
Physical approval | Compare battery-terminal position, mounting pattern, drive-end depth, pinion position and terminal layout with the removed unit or signed sample. |
MOQ | 20 pcs, subject to final order confirmation |
Normal lead time | 7 - 15 days after order confirmation |
Warranty | 18 months under agreed sales terms |
Denso-Type 12V 2.2kW CW is offered through configuration and sample matching. Because no public OE is assigned on this page, the buyer should use the removed starter, machine record, measurements and clear images as the order controls rather than treating a general type description as final fitment proof.
Approval point | Denso-Type 12V 2.2kW CW distributor release record |
Identity check | Denso-Type 12V 2.2kW CW plus removed-unit photos and dimensions |
Electrical review | 12V; 2.2kW; CW / clockwise |
Mechanical review | Confirm against approved sample; battery-terminal position; mounting face and terminal clocking |
Application link | Denso-type vehicle, tractor and industrial replacement programs |
Release evidence | packaging-linked part record |
A professional fitment review combines application data with the physical unit. Confirm mounting-hole centers, nose clearance, rotation, pinion position and battery-terminal position before approving a sample or production lot.
Incoming control should connect each carton and unit to the order record. Inspect physical damage, pinion and terminal protection, key dimensions and battery-terminal position; document the lot before it enters distributor stock.
Elecdura supports a 20-piece MOQ, normal 7 - 15 day lead time and 18-month warranty under agreed terms for Denso-Type 12V 2.2kW CW. Neutral packaging is standard; private-label review is available for qualified orders after the product configuration and artwork are approved.
B2B item | Supply arrangement for Denso-Type 12V 2.2kW CW |
Order position | Aftermarket replacement supplied against an approved configuration |
MOQ | 20 pcs |
Lead time | 7 - 15 days, subject to order confirmation |
Packaging | Neutral packaging or private-label review for qualified orders |
Receiving control | Check carton identity, battery-terminal position, pinion protection, terminals and sampled dimensions. |
Warranty | 18 months under agreed sales terms |
RFQ pack | Quantity, destination, application record, old-unit photos and packaging-linked part record |
Start with the buyer's original unit rather than a shortened description. Confirm Denso-Type 12V 2.2kW CW plus removed-unit photos and dimensions, then compare 12V system voltage, 2.2kW rated output, CW / clockwise; remaining values require sample approval with the removed starter. Finish the approval with battery-terminal position, the mounting pattern and terminal accessibility. Keep the result with the purchase order so service networks can repeat the same approval at replenishment.
Treat the purchase record as a fitment-control document, not only a price request. Verify nominal voltage from the machine record and starter label, then review rated output, cable size, battery condition and the control-terminal arrangement. Do not assume that a housing with a similar outline uses the same electrical package or cranking requirement. That record gives service networks a practical way to separate visually similar units before warehouse release.
A repeatable approval process begins with the complete electrical and mechanical record. Count the teeth, measure the available outside diameter and compare the pinion's rest and engaged positions with the old unit. A tooth-count match alone does not confirm ring-gear engagement, drive travel, nose clearance or the correct direction of operation. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
The safest wholesale decision links product identity, physical geometry and the application record. Provide the number of mounting holes, center distances, register diameter, drive-end depth and usable clearance around the solenoid and terminals. Add square-on photographs from the flange, pinion and terminal sides so production can review battery-terminal position before sample release. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
Before stock is released, the quotation and inspection record should describe the same configuration. A photo is useful for screening, but it should be combined with the complete label, application or machine record, electrical rating and physical measurements. When an external reference is unavailable, use packaging-linked part record and approve one sample before committing distributor inventory. This discipline helps service networks protect sample-to-production continuity without relying on a partial label match.
Use the removed assembly or signed sample as the common reference for sales, production and receiving. Check the label, overall workmanship, free pinion movement, mounting surfaces, terminal security and rotation under the agreed test condition. Compare the sample with the signed record for battery-terminal position, then retain the approved result as the standard for the production and receiving teams. Keep the result with the purchase order so service networks can repeat the same approval at replenishment.
For a volume order, every department should work from one controlled configuration file. Link the carton label to the purchase order and approved configuration, then sample-check external damage, mounting face, pinion, terminal protection and key dimensions. Record lot details and photographs before items enter saleable stock so later claims can be traced to a defined shipment. That record gives service networks a practical way to separate visually similar units before warehouse release.
Start with the buyer's original unit rather than a shortened description. Send required quantity, destination, packaging preference, expected order timing and the technical approval pack. Include old-unit images and equipment details when available, and identify any private-label or barcode requirement early so commercial and production reviews follow the same scope. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
Treat the purchase record as a fitment-control document, not only a price request. Neutral packaging is standard for qualified orders, while private-label review depends on quantity and artwork approval. Warranty follows the agreed sales terms; preserve installation findings, battery and cable checks, failed-unit images and lot identification so any claim can be evaluated against the approved configuration. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
For a quotation, send quantity, destination, target order date, packaging requirements and the application or equipment record for Denso-Type 12V 2.2kW CW. Add old-unit photographs and packaging-linked part record; this lets the sales and technical teams review the same scope before sample or volume release.
