Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Denso-Type 24V 7.5kW 10T CW
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Denso-type vehicle, tractor and industrial replacement programs
Confirm nose length, mounting face, pinion position, rotation and terminals against the removed unit or approved sample.
| Quantity: | |
|---|---|
Denso-Type 24V 7.5kW 10T CW is presented for fleet-parts buyers that need a controlled path from technical review to repeat ordering.
Denso-type vehicle, tractor and industrial replacement programs is the working supply scope. Confirm Denso-Type 24V 7.5kW 10T CW plus removed-unit photos and dimensions, nose length, mounting geometry, pinion position and terminal access before releasing distributor stock.
The manufacturing video supports supplier evaluation, while the buyer's final release should follow the listed electrical and mechanical checkpoints.
Specification | B2B ordering control for Denso-Type 24V 7.5kW 10T CW |
Product identity | Denso-Type 24V 7.5kW 10T CW |
OE / reference control | Denso-Type 24V 7.5kW 10T CW plus removed-unit photos and dimensions |
Application scope | Denso-type vehicle, tractor and industrial replacement programs |
System voltage | 24V |
Rated power | 7.5kW |
Pinion | 10T |
Rotation | CW / clockwise |
Physical approval | Compare nose length, mounting pattern, drive-end depth, pinion position and terminal layout with the removed unit or signed sample. |
MOQ | 20 pcs, subject to final order confirmation |
Normal lead time | 7 - 15 days after order confirmation |
Warranty | 18 months under agreed sales terms |
Denso-Type 24V 7.5kW 10T CW is offered through configuration and sample matching. Because no public OE is assigned on this page, the buyer should use the removed starter, machine record, measurements and clear images as the order controls rather than treating a general type description as final fitment proof.
Approval point | Denso-Type 24V 7.5kW 10T CW distributor release record |
Identity check | Denso-Type 24V 7.5kW 10T CW plus removed-unit photos and dimensions |
Electrical review | 24V; 7.5kW; CW / clockwise |
Mechanical review | 10T; nose length; mounting face and terminal clocking |
Application link | Denso-type vehicle, tractor and industrial replacement programs |
Release evidence | warehouse receiving specification |
Use the removed unit as the mechanical standard and the machine record as the application standard. Any disagreement in voltage, output, rotation, pinion or nose length should be resolved before stock commitment.
Use a practical incoming checklist covering labels, workmanship, mounting geometry, drive components, terminal positions and nose length. Retain results by lot to support repeat orders and warranty review.
Elecdura supports a 20-piece MOQ, normal 7 - 15 day lead time and 18-month warranty under agreed terms for Denso-Type 24V 7.5kW 10T CW. Neutral packaging is standard; private-label review is available for qualified orders after the product configuration and artwork are approved.
B2B item | Supply arrangement for Denso-Type 24V 7.5kW 10T CW |
Order position | Aftermarket replacement supplied against an approved configuration |
MOQ | 20 pcs |
Lead time | 7 - 15 days, subject to order confirmation |
Packaging | Neutral packaging or private-label review for qualified orders |
Receiving control | Check carton identity, nose length, pinion protection, terminals and sampled dimensions. |
Warranty | 18 months under agreed sales terms |
RFQ pack | Quantity, destination, application record, old-unit photos and warehouse receiving specification |
Start with the buyer's original unit rather than a shortened description. Confirm Denso-Type 24V 7.5kW 10T CW plus removed-unit photos and dimensions, then compare 24V system voltage, 7.5kW rated output, 10T pinion, CW / clockwise with the removed starter. Finish the approval with nose length, the mounting pattern and terminal accessibility. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
Treat the purchase record as a fitment-control document, not only a price request. Verify nominal voltage from the machine record and starter label, then review rated output, cable size, battery condition and the control-terminal arrangement. Do not assume that a housing with a similar outline uses the same electrical package or cranking requirement. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
A repeatable approval process begins with the complete electrical and mechanical record. Count the teeth, measure the available outside diameter and compare the pinion's rest and engaged positions with the old unit. A tooth-count match alone does not confirm ring-gear engagement, drive travel, nose clearance or the correct direction of operation. This discipline helps fleet-parts buyers separate nearby starter variants without relying on a partial label match.
The safest wholesale decision links product identity, physical geometry and the application record. Provide the number of mounting holes, center distances, register diameter, drive-end depth and usable clearance around the solenoid and terminals. Add square-on photographs from the flange, pinion and terminal sides so production can review nose length before sample release. Keep the result with the purchase order so fleet-parts buyers can repeat the same approval at replenishment.
Before stock is released, the quotation and inspection record should describe the same configuration. A photo is useful for screening, but it should be combined with the complete label, application or machine record, electrical rating and physical measurements. When an external reference is unavailable, use warehouse receiving specification and approve one sample before committing distributor inventory. That record gives fleet-parts buyers a practical way to separate visually similar units before warehouse release.
Use the removed assembly or signed sample as the common reference for sales, production and receiving. Check the label, overall workmanship, free pinion movement, mounting surfaces, terminal security and rotation under the agreed test condition. Compare the sample with the signed record for nose length, then retain the approved result as the standard for the production and receiving teams. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
For a volume order, every department should work from one controlled configuration file. Link the carton label to the purchase order and approved configuration, then sample-check external damage, mounting face, pinion, terminal protection and key dimensions. Record lot details and photographs before items enter saleable stock so later claims can be traced to a defined shipment. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
Start with the buyer's original unit rather than a shortened description. Send required quantity, destination, packaging preference, expected order timing and the technical approval pack. Include old-unit images and equipment details when available, and identify any private-label or barcode requirement early so commercial and production reviews follow the same scope. This discipline helps fleet-parts buyers separate nearby starter variants without relying on a partial label match.
Treat the purchase record as a fitment-control document, not only a price request. Neutral packaging is standard for qualified orders, while private-label review depends on quantity and artwork approval. Warranty follows the agreed sales terms; preserve installation findings, battery and cable checks, failed-unit images and lot identification so any claim can be evaluated against the approved configuration. Keep the result with the purchase order so fleet-parts buyers can repeat the same approval at replenishment.
For a quotation, send quantity, destination, target order date, packaging requirements and the application or equipment record for Denso-Type 24V 7.5kW 10T CW. Add old-unit photographs and warehouse receiving specification; this lets the sales and technical teams review the same scope before sample or volume release.
