FYD164-N Heavy-Duty Starter Motor 12V 2.0kW 10T

FYD164-N Heavy-Duty Starter Motor Replacement Supply for B2B Procurement

FYD164-N is intended for procurement against catalog-specified heavy-duty equipment applications with a 12V, 2.0kW, 10-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

For repeat sourcing of FYD164-N, use FYD164-N as reference evidence and catalog-specified heavy-duty equipment applications as the application checkpoint. Neither item replaces measurement of the removed starter. Archive the approved sample photos, key dimensions, carton label and inspection date under one buyer part number so purchasing, warehouse and warranty teams work from the same physical definition.

FYD164-N Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD164-N.

FYD164-N Starter Motor Distributor Specifications for Wholesale Supply

FYD164-N Starter Motor Catalog Reference Review for Distributor Sourcing

Use FYD164-N as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD164-N Starter Motor Bulk Fitment Approval for Bulk Procurement

Fitment control for FYD164-N starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

FYD164-N Starter Motor Wholesale Receiving Inspection for B2B Supply

Inspect incoming FYD164-N lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

FYD164-N Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

FYD164-N Starter Motor Distributor FAQ for Fleet Replacement

What engine or equipment data is required for FYD164-N?

Confirm the complete FYD164-N group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 2.0kW and 10T be checked together on FYD164-N?

Confirm the complete FYD164-N group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for FYD164-N?

Confirm the complete FYD164-N group together with the 12V, 2.0kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on FYD164-N?

Measure and compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of FYD164-N starters be inspected?

Tie every carton and sampled unit to FYD164-N, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for FYD164-N?

A substitute is acceptable only when its complete reference relationship, 12V system, 2.0kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a FYD164-N warranty claim?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a FYD164-N wholesale quotation?

Send FYD164-N and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can FYD164-N be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with FYD164-N, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Request a B2B Quote for FYD164-N Starter Motors

Send the complete reference, catalog-specified heavy-duty equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.