FYD204-N Heavy-Duty Starter Motor 12V 2.2kW 9T

FYD204-N Heavy-Duty Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, FYD204-N identifies a 12V, 2.2kW, 9-tooth clockwise configuration for catalog-specified heavy-duty equipment applications. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

Build the approval trail for FYD204-N around three items: the complete FYD204-N reference group, the catalog-specified heavy-duty equipment applications application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

FYD204-N Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD204-N.

FYD204-N Starter Motor Distributor Specifications for Aftermarket Buyers

FYD204-N Starter Motor Catalog Reference Review for Fleet Replacement

Use FYD204-N as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD204-N Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete FYD204-N group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

FYD204-N Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the FYD204-N lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

FYD204-N Starter Motor MOQ and Private-Label Supply for Bulk Procurement

FYD204-N Starter Motor Distributor FAQ for B2B Supply

What makes a FYD204-N RFQ technically complete?

Send FYD204-N and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for FYD204-N?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the signed-off sample with FYD204-N, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can FYD204-N be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on FYD204-N claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should FYD204-N be controlled in a B2B starter order?

Use FYD204-N as a product-reference control reference, not as an OE interchange claim. The catalog specification narrows the candidate, but it does not prove vehicle or engine fitment. Keep the removed-unit label, drive-end photograph, mounting-face view, rear-terminal view and measured pinion data in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is FYD204-N commonly used, and what still needs confirmation?

Confirm the complete FYD204-N group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on FYD204-N?

Confirm the complete FYD204-N group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched FYD204-N order?

Confirm the complete FYD204-N group together with the 12V, 2.2kW, 9-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering FYD204-N?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Request a B2B Quote for FYD204-N Starter Motors

Send the complete reference, catalog-specified heavy-duty equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.