FYD214-N Heavy-Duty Starter Motor 12V 2.2kW 10T

FYD214-N Heavy-Duty Starter Motor B2B Supply for Aftermarket Buyers

FYD214-N gives aftermarket buyers a defined 12V, 2.2kW, 10-tooth clockwise configuration for catalog-specified heavy-duty equipment applications. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

The distributor record for FYD214-N should connect the reference group FYD214-N with catalog-specified heavy-duty equipment applications. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

FYD214-N Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD214-N.

FYD214-N Starter Motor Distributor Specifications for Bulk Procurement

FYD214-N Starter Motor Catalog Reference Review for B2B Supply

Use FYD214-N as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD214-N Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Confirm the complete FYD214-N group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

FYD214-N Starter Motor Wholesale Receiving Inspection for Fleet Replacement

For a wholesale shipment, sample units across the FYD214-N lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

FYD214-N Starter Motor MOQ and Private-Label Supply for Wholesale Supply

FYD214-N Starter Motor Distributor FAQ for Distributor Sourcing

How are MOQ, samples and repeat orders managed for FYD214-N?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with FYD214-N, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can FYD214-N be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on FYD214-N claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How should FYD214-N be controlled in a B2B starter order?

Use FYD214-N as a product-reference control reference, not as an OE interchange claim. The catalog specification narrows the candidate, but it does not prove vehicle or engine fitment. Retain the removed-unit label, drive-end photograph, mounting-face view, rear-terminal view and measured pinion data in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is FYD214-N commonly used, and what still needs confirmation?

Confirm the complete FYD214-N group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on FYD214-N?

Confirm the complete FYD214-N group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched FYD214-N order?

Confirm the complete FYD214-N group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering FYD214-N?

Measure and compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for FYD214-N?

Tie every carton and sampled unit to FYD214-N, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for FYD214-N Starter Motors

Send the complete reference, catalog-specified heavy-duty equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.