FYD344-N Heavy-Duty Starter Motor 12V 1.4kW 10T

FYD344-N Heavy-Duty Starter Motor Replacement Supply for B2B Procurement

FYD344-N is intended for procurement against catalog-specified heavy-duty equipment applications with a 12V, 1.4kW, 10-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

Treat FYD344-N as one controlled purchasing identity. Keep FYD344-N, catalog-specified heavy-duty equipment applications, the approved dimensional record and the signed sample together in the sourcing file. If a future offer changes any suffix, rating or drive-end detail, reopen technical approval before comparing price or delivery. This keeps distributor quotations tied to the part actually reviewed rather than to a visually similar starter family.

FYD344-N Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD344-N.

FYD344-N Starter Motor Distributor Specifications for Wholesale Supply

FYD344-N Starter Motor Catalog Reference Review for Distributor Sourcing

Use FYD344-N as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD344-N Starter Motor Bulk Fitment Approval for Bulk Procurement

Before accepting FYD344-N as a replacement, obtain the full vehicle, machine or engine record and compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

FYD344-N Starter Motor Wholesale Receiving Inspection for B2B Supply

Receiving control should link the carton, unit label and inspection sample to FYD344-N. Verify reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

FYD344-N Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

FYD344-N Starter Motor Distributor FAQ for Fleet Replacement

Which applications should buyers confirm for the FYD344-N starter motor?

The specified application is catalog-specified heavy-duty equipment applications. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define FYD344-N?

The specified configuration is 12V, 1.4kW, 10-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for FYD344-N?

Confirm the complete FYD344-N group together with the 12V, 1.4kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for FYD344-N?

Measure and compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a FYD344-N bulk order?

Tie every carton and sampled unit to FYD344-N, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as FYD344-N?

A substitute is acceptable only when its complete reference relationship, 12V system, 1.4kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a FYD344-N starter motor?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for FYD344-N?

Send FYD344-N and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for FYD344-N procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with FYD344-N, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Request a B2B Quote for FYD344-N Starter Motors

Send the complete reference, catalog-specified heavy-duty equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.