NAD500300 Land Rover Discovery 3 Starter Motor 12V 1.8kW 11T

NAD500300 Land Rover Discovery 3 Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, NAD500300 should remain tied to Land Rover Discovery 3 and Discovery 4 with the 4.0L V6 Cologne gasoline engine and the exact 12V, 1.8kW, 11-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

NAD500300 Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating NAD500300.

NAD500300 Starter Motor Distributor Specifications for B2B Supply

NAD500300 Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use NAD500300 as the primary purchasing reference and cross-check NAD500150, LR009297, 428000-1912. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

NAD500300 Starter Motor Bulk Fitment Approval for Fleet Replacement

Fitment control for NAD500300 starts with the old starter and the application record. Compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

NAD500300 Starter Motor Wholesale Receiving Inspection for Wholesale Supply

Inspect incoming NAD500300 lots against the signed sample and purchase-line specification. Check OE label, electrical specification, pinion, flange, terminals, finish and batch packaging, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an incorrect variant causes returns, repeated labor and avoidable damage to buyer confidence.

NAD500300 Starter Motor MOQ and Private-Label Supply for Distributor Sourcing

NAD500300 Starter Motor Distributor FAQ for Bulk Procurement

What must be approved before volume supply for NAD500300?

Confirm the complete NAD500300 / NAD500150 / LR009297 / 428000-1912 group together with the 12V, 1.8kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on NAD500300?

Compare the VIN, engine code, production year, OE suffix, mounting pattern, pinion and connectors with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of NAD500300 starters be inspected?

Tie every carton and sampled unit to NAD500300, the approved cross-reference set and the supplier lot. Inspect OE label, electrical specification, pinion, flange, terminals, finish and batch packaging, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an incorrect variant causes returns, repeated labor and avoidable damage to buyer confidence. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for NAD500300?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.8kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample prior to changing the purchase line. Retain materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a NAD500300 warranty claim?

Inspect battery state, cranking voltage, cable and ground resistance, control circuit and ring-gear condition before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a NAD500300 wholesale quotation?

Send NAD500300 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can NAD500300 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with NAD500300, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should NAD500300 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for NAD500300?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Request a B2B Quote for NAD500300 Starter Motors

Send the complete reference, Land Rover Discovery 3 and Discovery 4 with the 4.0L V6 Cologne gasoline engine, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.