OK60G-18-400 03111-4180 Kia K2700 Starter Motor 12V 2.2kW 11T

OK60G-18-400 Starter Motor Wholesale Fitment Overview for Distributor Sourcing

This Kia starter family is frequently listed under both vehicle-maker and component-maker references. A purchasing record should connect OK60G-18-400, 03111-4180 and the accepted replacement numbers without assuming that every K2700 or Pregio uses the same drive end.

The controlled ordering set is 12V, 2.2kW and 11 teeth. Any offer with a different power, tooth count, rotation convention or locating diameter must be separated for technical review and physical-sample approval before purchase.

OK60G-18-400 Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the verified OK60G-18-400 / 03111-4180 specification and fitment controls on this page for product approval.

OK60G-18-400 Starter Motor Distributor Specifications for Wholesale Supply

OK60G-18-400 Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use OK60G-18-400 and 03111-4180 as the primary pair, with OK65A-18-400, UD02104S, Bosch 0986AR0268 and Lester 1819 as matching leads. Confirm the 11-tooth drive, 64 mm registration and rear-terminal layout before accepting an interchange.

OK60G-18-400 Starter Motor Bulk Fitment Approval for Fleet Procurement

For Kia K2700, Bongo or Pregio fleets, capture the 2.7L diesel engine record, production year and old-unit label. Compare the mounting ears, locating diameter, pinion offset and solenoid clocking. Record which end is used to describe rotation so an apparent CW/CCW disagreement does not hide a physical mismatch.

OK60G-18-400 Starter Motor Receiving Inspection for Distributor Stock

A receiving inspector should verify 12V, 2.2kW and 11T on sampled units, measure the pinion and registration, and compare the nose casting with the approved Kia sample. Keep mixed 10T units, unexplained 2.0kW labels or different terminal layouts on hold until the supplier resolves the deviation.

OK60G-18-400 Starter Motor MOQ and Private-Label Supply for B2B Orders

For Kia diesel distributors, neutral cartons or qualified private-label packaging can be reviewed with a controlled reference and lot label. Protect the solenoid terminal and drive end during transit, and keep the OK60G-18-400 / 03111-4180 identity visible for receiving and claims.

OK60G-18-400 Starter Motor Distributor FAQ for Bulk Procurement

Why do OK60G-18-400 listings show conflicting 10T and 11T data?

Some market listings combine more than one Kia or Poong Sung configuration, and shortened tables can carry a neighboring specification. Use the full OK60G-18-400 / 03111-4180 reference pair, then physically count the pinion and compare the gear diameter. For this sourcing record, the 12V, 2.2kW and 11-tooth set is the approval basis, subject to confirmation against the removed unit.

How should rotation be confirmed for the 03111-4180 starter?

Rotation descriptions can change when viewed from the drive end instead of the commutator end. Do not reject or accept the unit from a CW or CCW abbreviation alone. Photograph the reference viewpoint, compare the helix and engagement direction with the old starter, and use a bench-test record when available. The approved sample should state the convention so quotations and inspection reports use the same language.

Which Kia vehicle details should accompany an OK60G-18-400 inquiry?

Send the K2700, Bongo or Pregio model, production year, 2.7L diesel engine information and every reference on the removed starter. Add front, side and rear photographs that show the mounting ears, locating ring and terminal clocking. Kia platforms can span multiple production changes, so the vehicle name alone is not a sufficient control for a wholesale order.

What dimensions help separate this Kia starter from a nearby version?

Measure the approximately 64 mm locating diameter, mounting-hole positions, pinion outside diameter near 34.8 mm, pinion rest position and overall nose geometry. Compare the solenoid angle and terminal clearance as well. A nearby 10-tooth unit can look similar in a small photo, but different registration or engagement depth can prevent installation or create ring-gear damage.

What should a Kia distributor sample during incoming inspection?

Open cartons from different parts of the lot and compare the complete label, 12V and 2.2kW ratings, 11-tooth drive, nose casting, mounting ears, terminals and protective packaging with the signed sample. Record lot numbers and pass, fail or hold quantities. A mixed 2.0kW or 10T unit should remain segregated until the supplier proves that it belongs to the approved interchange.

Can OK65A-18-400 or UD02104S be ordered as direct replacements?

Those numbers are useful cross-reference leads, but a number match does not eliminate the fitment check. Confirm that the supplied starter matches the OK60G-18-400 electrical rating, 11-tooth drive, locating diameter, mounting geometry and terminal arrangement. If the replacement supplier changes the housing or solenoid position, approve a sample and update the purchase record before releasing normal inventory.

How can a workshop document a valid Kia starter warranty claim?

Record battery voltage, loaded voltage drop, ground condition, start signal, engine cranking load and ring-gear condition before removing the unit. Attach the old and supplied labels, installation date, vehicle and engine record, failure symptoms and photographs of terminals and drive end. This evidence separates a product fault from cable resistance, battery weakness or mechanical interference and speeds a distributor's technical review.

What packaging protects an 03111-4180 shipment?

Use formed inner support or equivalent protection that prevents the heavy starter from striking the nose housing or bending the solenoid terminals. The carton must keep the reference, quantity and lot code readable. For private-label work, agree artwork and barcode content without removing the technical identifiers. Destination stacking and moisture exposure should be considered before the final carton is approved.

What information allows a fast B2B quote for OK60G-18-400?

Send OK60G-18-400, 03111-4180 and every visible cross-reference, plus the Kia model, 2.7L diesel engine record, old-unit images, order quantity, destination and target date. State sample, inspection, packaging and warranty-document needs at the beginning. A complete RFQ lets the supplier quote one verified 11-tooth configuration instead of returning a generic Kia starter price.

Request a B2B Quote for OK60G-18-400 Starter Motors

Provide the Kia model, 2.7L diesel engine record, complete old-unit references, clear mounting and terminal photos, quantity and destination. Elecdura will review the 11T 2.2kW configuration before quoting.