RE40092 John Deere 10T Starter Motor Distributor Supply

RE40092 Starter 10T Pinion for B2B Drawing Review

The mounting drawing shows three Ø11 hole references, 37°, 53° and 53° clocking, an Ø89 drive-end feature, a 48 mm side reference, R63.5 and a 127 mm mounting relationship. These points provide a repeatable inspection route for the first sample.

1. Count ten teeth and confirm CW rotation.

2. Compare the three-hole face and ear spacing.

3. Check the drive-end projection and locating feature.

4. Record terminal orientation with the approved equipment reference.

RE40092 John Deere Starter Coverage for Dealer Stock

John Deere parts requests may arrive as RE40092, RE54090, RE59595, SE501426, TY24437 or a Denso/Lester number. The distributor can use those references to locate the product family, then control the order with the 12V, 2.5kW, 10T, CW specification and the actual equipment record.

The catalog also lists Caterpillar V60F 4.0. Keep that application attached to its customer or sample evidence rather than assuming every RE40092 sale covers every machine in the broader number group.

RE40092 Starter Distributor Supply and Stock Control

Elecdura can supply this starter for warehouse replenishment, project orders and distributor programs. Neutral cartons support standard orders, while branded boxes, labels and barcodes can be reviewed when quantity, artwork and destination requirements are available.

For a multi-branch distributor, keep one approved product file containing the complete OE group, ten-tooth image, mounting measurements and sample photographs. Branch staff can then search several familiar numbers without creating separate unverified versions.

The video gives buyers a view of Elecdura starter production and testing capability. The supply decision for RE40092 is still based on the John Deere or Caterpillar equipment details, stated 12V 2.5kW 10T specification and confirmed three-hole geometry.

RE40092 12V 2.5kW Starter Motor Specifications and B2B Fitment Drawing

RE40092 10T starter mounting and drive-end reference for B2B sample review.

The RE40092 geometry gives agricultural-parts buyers repeatable inspection points. Use 3 mounting holes, catalog Ø11 reference, 37° / 53° / 53° clocking, Ø89 drive-end locating reference and 48 mm drive-end reference when comparing the first sample.

Save the ten-tooth and three-hole inspection images with the master stock record for later branch orders.

RE40092 John Deere Starter Motor Wholesale FAQ

Which John Deere numbers are included in the RE40092 group?

The reference group includes RE40092, RE54090, RE59595, SE501426, TY24437 and TY25972, along with Denso and aftermarket numbers. Send the complete number from the machine or purchase record. Elecdura will connect it to the 12V, 2.5kW, 10T configuration and verify the physical face before final quotation.

Is this starter limited to John Deere equipment?

John Deere is the primary catalog application group, while Caterpillar V60F 4.0 is also listed. Buyers should identify the exact machine, engine or customer record behind the inquiry. The additional application should not be expanded to unrelated Caterpillar equipment without a matching OE, mounting geometry and approved sample.

Why is the ten-tooth pinion a key stock-control field?

Ten teeth quickly separate this RE40092 configuration from a starter with a similar Denso housing but another drive. Record the tooth count on the RFQ, product label and receiving form. A close pinion photo stored with the approved sample helps branch warehouses verify the item without relying only on packaging text.

What do the 37° and 53° angles show?

They describe the clocking of the three mounting points around the face. The catalog shows one 37° upper relationship and two 53° relationships, together with three Ø11 hole references. Compare these positions in a straight-on image so a different ear layout is not hidden by perspective.

How should a buyer use Lester 17630 in an RFQ?

Submit 17630 together with the John Deere or Caterpillar application, complete OE if available, and product photos. Independent product data supports the 12V, 2.5kW, 10T family, but the buyer’s mounting and terminal evidence still decides whether the requested starter belongs to the RE40092 line shown here.

What should be measured on the first RE40092 sample?

Check the three mounting holes, the Ø89 drive-end feature, 48 mm side reference, R63.5 relationship and the catalog 127 mm mounting dimension. Also confirm ten teeth and terminals. Use actual tools on the sample; the technical image communicates the drawing but is not a scale for measurement.

Can several Deere service numbers share one distributor SKU?

They can share a controlled stocking SKU after the full number group and physical version are approved. Preserve the Deere application, 10T drive, mounting drawing and sample photos in the master record. If a branch receives a different voltage, power or geometry, create a separate item rather than enlarging the existing SKU.

What information supports a repeat wholesale order?

Reference the approved RE40092 order or sample, then state quantity, delivery destination, required date and packaging version. Note any change in machine application or labeling. This gives Elecdura a stable basis for production and helps the distributor maintain the same 12V 2.5kW 10T specification across replenishment cycles.

Request a RE40092 Starter Motor Wholesale Quote

Send the John Deere or Caterpillar equipment record, exact RE40092-group number, ten-tooth and three-hole images, stock quantity and packing preference. Elecdura will prepare an offer that keeps the approved physical version consistent across the distributor’s repeat orders.

Mention the Deere branch or Caterpillar equipment group that will receive the stock and attach its inspection form. Elecdura will connect the quotation to the accepted 10T sample and packing version.