S1015 Mercedes OM904 Starter Motor Wholesale Supply

S1015 Starter Motor Fleet Replacement Supply for Mercedes-Benz OM904.942 and OM900.918 engines

S1015 supports Mercedes-Benz OM904.942 and OM900.918 engines sourcing where buyers need a defined electrical and drive-end match. Its 24V, 4.5kW, 9T CW specification must remain linked to the 9-tooth module-3 interface tied to the OM904.942 and OM900.918 engine records; a visually related unit may belong on a different RFQ line.

Before comparing S1015 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

S1015 Starter Motor Technical Data for Fleet Parts Buyers

The S1015 dimensional review starts at the mounting face: verify 3 × Ø11 mounting holes, Ø127 mounting-hole circle and Ø89 locating diameter. Then compare the 45 mm distance to drive gear. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For S1015, electrical and mechanical identity must agree: 24V, 4.5kW, 9T, module 3 and CW. Check the terminals and solenoid position before installation. If the old unit differs at one of these points, keep it outside the defined stock line.

S1015 Starter Motor Cross-Reference Review for Fleet Buyers

The S1015 cross-reference group includes S1015, 111982, 10461470, 10479626, 10479650, DRS0057, DRX67095. These numbers improve search coverage across fleets and supplier systems, but they do not replace a check of 24V, 4.5kW, 9T, CW, mounting geometry and terminals.

If a mixed S1015 enquiry contains different pinions, drive positions or connector layouts, list each complete reference and photograph separately. Elecdura can then return distinct offers instead of placing unlike starters under one broad reference family.

S1015 Starter Motor Fleet Supply and Replenishment Support

Wholesale planning for S1015 can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Stock planning should reflect the supported Mercedes-Benz OM904.942 and OM900.918 engines population, recent consumption and transfer time between service locations. Keeping S1015, the 9T drive and the approved mounting interface visible in the inventory record reduces emergency substitution and improves later reorder accuracy.

The production video gives importers and fleet buyers a view of Elecdura starter assembly and electrical checks. For S1015, use it alongside the product-specific reference, application and physical controls on this page, rather than treating a general factory presentation as evidence of fitment.

S1015 Starter Motor Questions from Commercial Buyers

Before removing S1015, what should the workshop test under load in a Mercedes OM904 workshop workshop?

Before fitting S1015, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

Why does S1015 require a physical comparison for Mercedes-Benz applications during workshop sourcing?

For S1015, ask the workshop for the removed starter label and the exact equipment record. Match 24V, 4.5kW, 9T and CW, then compare the locating diameter, mounting holes and terminals. If one of those items changes, request another quotation instead of accepting the similar housing.

Do all references listed with S1015 identify an interchangeable unit in a Mercedes OM904 workshop sourcing program?

The references identify a related sourcing family, not automatic interchangeability. Use S1015, 111982, 10461470, 10479626, 10479650 to locate possible matches, then confirm 24V, 4.5kW, 9T, CW and the mounting face. Any difference in drive position, terminal layout or locating diameter requires a separate product decision.

Which mounting-face points distinguish the specified S1015 version during a Mercedes OM904 workshop inspection?

Place the removed starter and S1015 on the same mounting-face orientation. Compare Ø89 locating diameter, Ø127 mounting-hole circle, the 3 × Ø11 mounting holes and the 45 mm distance to drive gear. The drawing is a dimensional reference rather than a scale template, so use suitable measuring tools and verify the terminals separately.

How can S1015 stock be separated by application risk in a Mercedes OM904 workshop program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent S1015 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

Which first-lot checks protect a distributor receiving S1015 during a Mercedes OM904 workshop receiving check?

For S1015, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø11 mounting holes, Ø89 locating diameter and the specified 9T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

Which commercial details belong in an export enquiry for S1015 in a Mercedes OM904 workshop sourcing program?

Send the complete OE number, exact Mercedes-Benz OM904.942 and OM900.918 engines details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 4.5kW 9T CW starter with packing, lead time, warranty and freight options.

Which photographs and readings help Elecdura review S1015 after installation in a Mercedes OM904 workshop review?

Keep the carton or product traceability code and note when and where S1015 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

S1015 Ask for Starter Motor Export Pricing

Prepare the S1015 enquiry with the exact application, full removed-unit reference, front and terminal-side photos, quantity, destination and target date. Send it to info@elecdurauto.com so Elecdura can return a technically defined offer covering samples or bulk supply, export packing, warranty and delivery options.