M105R3013SE Mercedes OM541 Starter Motor Wholesale

M105R3013SE Starter Motor Aftermarket Supply for Mercedes-Benz OM541 and OM542 engine

M105R3013SE defines stock for Mercedes-Benz OM541 and OM542 engine as 24V, 7.5kW, 12T and CW. Confirm 24V 7.5kW 12T module-3.175 product with the cataloged Ø92 mm locating face before releasing a first order or replacing an approved sample.

For the first M105R3013SE order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.

M105R3013SE Starter Motor Specification Table for B2B Sourcing

A warehouse can confirm the M105R3013SE interface without dismantling the unit. Measure Ø92 mm locating diameter and Ø146 mm mounting-hole circle, inspect 3 mounting holes shown as 16.5, 16.5, 16.5 mm, then verify the 47 mm drive-end distance. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.

For M105R3013SE, record 12T, CW, 24V and 7.5kW, including module 3.175. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.

M105R3013SE Starter Motor Reference Matching for B2B Quotations

• Use the full number: Start with L30013708100B002, M73003708100002, STP3013MH, STP3013UL, 51117200001, X51117200001, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

M105R3013SE Starter Motor Aftermarket Supply for Regional Distributors

Distributors can combine an initial M105R3013SE sample plan with a later replenishment forecast. MOQ is 20 pieces, normal lead time is 7–15 days after confirmation and warranty is 18 months under agreed terms; packing and shipping are quoted for the actual route and arrival requirement.

A first-lot sample is useful when the fleet carries related starters with similar housings. Retain the approved M105R3013SE label, front view and terminal view, then use recent demand and branch transfer time to set reserve stock and delivery priorities.

This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for M105R3013SE continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.

M105R3013SE Starter Motor Questions from Commercial Buyers

What should a distributor match before ordering M105R3013SE for Mercedes-Benz OM541 and OM542 engine during regional sourcing?

Use the full old-unit number and Mercedes-Benz OM541 and OM542 engine record. Compare the 12T pinion, 3 mounting holes shown as 16.5, 16.5, 16.5 mm, Ø92 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

Which mounting-face points distinguish the specified M105R3013SE version during a Mercedes OM541 regional inspection?

Align the removed starter and M105R3013SE at the mounting face. Compare Ø92 mm locating diameter, Ø146 mm mounting-hole circle, 3 mounting holes shown as 16.5, 16.5, 16.5 mm and 47 mm drive-end distance. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Why is the M105R3013SE reference match only the start of product selection in a Mercedes OM541 regional sourcing program?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The M105R3013SE group is acceptable only when 24V, 7.5kW, 12T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

What electrical checks help confirm that M105R3013SE is actually required in a Mercedes OM541 regional workshop?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for M105R3013SE installation and for any later service discussion with the supplier.

How can branches reduce emergency transfers of M105R3013SE stock in a Mercedes OM541 regional program?

Retain engine and vehicle mapping for Actros, Axor or Travego fleet replenishment. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

Which arrival photographs help trace a shipment of M105R3013SE during a Mercedes OM541 regional receiving check?

Receiving should verify the M105R3013SE label, quantity and packaging before opening sampled cartons. Compare the 12T drive, Ø92 mm locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How can an importer obtain an accurate delivered price for M105R3013SE in a Mercedes OM541 regional sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For M105R3013SE, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

Which installation facts help review unusual performance from M105R3013SE in a Mercedes OM541 regional review?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate M105R3013SE without assuming that every no-crank complaint originates inside the starter.

M105R3013SE Start a Starter Motor Wholesale Enquiry

To discuss M105R3013SE supply, send the complete application and old-unit identification, mounting-face and terminal photos, requested quantity, destination and timing to info@elecdurauto.com. The reply will address the specified starter, sample or bulk availability, export packing, commercial terms and delivery route.